小弟最近買了一台0804 要嘗試用以前舊的800MB的CD-R 備份資料，
赫然發現不管怎麼設定我的NERO都是不能超燒，NERO一直回覆無效的參數區，
在NERO的光碟機資訊是顯示支援超燒，現在希望有人可以幫小弟解惑一下。
到底是不是0804不能燒超長片?

小弟的Nero版本: 6.3.1.15 燒錄器： <ASUS DRW-0804P> BIOS 版本: 1.19 - HA 1 TA 1 - 6.3.1.15

以下是小弟把NERO顯示無效的資訊訊息

ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 2003/12/16 下午 08:18:06
Nero版本: 6.3.1.15
燒錄器： <ASUS DRW-0804P> 版本: 1.19 - HA 1 TA 1 - 6.3.1.15
界面卡驅動程式： <atapi> HA 1
Drive buffer : 2000kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <ASUS DVD-E616P >版本: 1.04 - HA 1 TA 0 - 6.3.1.15
界面卡驅動程式： <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3120026A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ASUS DVD-E616P atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ASUS DRW-0804P atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 1 DMA: Off

=== CDRom-Device-Map ===
ASUS DVD-E616P E: CDRom0
ASUS DRW-0804P F: CDRom1
AXV CD/DVD-ROM G: CDRom2
AXV CD/DVD-ROM H: CDRom3
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523500kB)
Free physical memory: 101MB (104372kB)
Memory in use : 80 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.8.2004
CD-ROM(UDF)
上午 09:15:47 #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : Multibyte
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

上午 09:15:47 #2 Phase 90 File dlgbrnst.cpp, Line 1845
啟動防燒壞保護

上午 09:15:47 #3 Text 0 File Reader.cpp, Line 118
Reader running

上午 09:15:47 #4 Text 0 File Burncd.cpp, Line 3167
Turn on 光碟一次燒錄(DAO), using CD-R/RW media

上午 09:15:50 #5 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 445499 ( 99:01.74), real: 79:59.73
Last address to be written: 411963 ( 91:34.63)

上午 09:15:50 #6 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: YES (enabled: CD)

上午 09:15:50 #7 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: ASUS DRW-0804P;
CDR code: 00 96 43 29; CD manufacturer unknown
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

上午 09:15:50 #8 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Not enough free discspace.
(Medium in drive: CD-R. Medium required by compilation: CD-R/RW.)

上午 09:15:50 #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 411964 (411964) = #411964/91:32.64
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 411964 blocks [ASUS DRW-0804P ]
--------------------------------------------------------------

上午 09:15:50 #10 Text 0 File ThreadedTransferInterface.cpp, Line 983
Prepare recorder [ASUS DRW-0804P ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 844009472, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
411964 | lead-out | 1 | 0x00 | 0x41

上午 09:15:50 #11 Phase 24 File dlgbrnst.cpp, Line 1845
檔案暫存作業開始

上午 09:15:50 #12 Text 0 File Burncd.cpp, Line 4177
Cache writing successful.

上午 09:15:50 #13 Phase 25 File dlgbrnst.cpp, Line 1845
檔案暫存作業完成

上午 09:15:50 #14 Phase 36 File dlgbrnst.cpp, Line 1845
以24x (3,600 KB/s)的速度開始燒錄

上午 09:15:50 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2343
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

上午 09:15:50 #16 Text 0 File Mmc.cpp, Line 15624
StartDAO : CD-Text - Off

上午 09:15:50 #17 Text 0 File Mmc.cpp, Line 20239
Set BUFE: supported -> ON

上午 09:15:51 #18 SCSI -1067 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03996000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x00
CDB Data: 0x5D 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x26 0x00

上午 09:15:51 #19 Text 0 File Mmc.cpp, Line 15911
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 5b 22 40

上午 09:15:51 #20 CDR -1067 File ThreadedTransferInterface.cpp, Line 1613
無效的參數欄

上午 09:15:51 #21 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1613
無法進行光碟一次燒錄的起始動作

上午 09:15:51 #22 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

上午 09:15:51 #23 Phase 38 File dlgbrnst.cpp, Line 1845
以24x (3,600 KB/s)的速度燒錄失敗


Existing drivers:
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 2002/8/29 下午 04:27:50 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)