|
||
|
*停權中*
加入日期: Mar 2003 您的住址: 米國早安州的熱血台灣人
文章: 2,804
|
狂少馬上替大家找來IC7MAX3 解決方案囉!
以下是Abit USA的回應,有關AIDA32 掃PCI port時會發生的freeze狀況!
以及CPU/RAM比例的加強! "......(不便透露內容,sorry).... Just install the PC Mark2002 and run the CPU test alone just fine. Also AIDA has addressed Scanning PCI issue at http://www.aida32.hu/aida32-faq.php?id=2 We are using the new release Bios ID"12" which is available at http://fae.abit.com.tw/eng/download/bios/ic7-max3.php The result is quite impressive with the Bios update. 狂少會做測試再回報大家!  剛看了一下, Bios 12的修正: BIOS ID: 1.2 Released Date: 8/21/2003 Displayed correct FSB frequency for PSB400 CPU after CMOS data discharged. Fixed the booting failure problem of Maxtor SATA HDD (Model name: 6Y120M0) in ICH5R RAID 0 status. Changed the option wordings of "Boot Device" from "ZIP100" to "ZIP100/250" and from "USB-ZIP" to "USB-ZIP/LS120". Enhanced the system stability when over clocks the CPU FSB over 255 MHz with CPU RAM = 1:1 setting. Revised the wording of memory status from "DDR at Bank" to "DDR at DIMM" in system configuration table. Removed the status report of Serial/Parallel port in system configurations table. Included new Intel CSA LAN boot agent. Displayed correct specification of DDR200 memory module during POST. Fixed the problem that specific CD-ROM device could not be correctly detected when there is specific HDD connected onto the same IDE cable. Updated CPU micro code (0F24H/1EH, 0F25H/15H, 0F27H/37H, 0F29H/17H). Revised display wording of "Time Alarm" menu box in BIOS setup. BIOS Compile Date: 8/21/2003. 此文章於 2003-08-30 06:21 AM 被 狂之風 編輯. |
|||||||
2003-08-30, 06:16 AM
#1
|
|
|
Golden Member
 
加入日期: Mar 2003 您的住址: 台中
文章: 3,280
|
狂爺現在任職於北美除蟲部部長
__________________
相逢自是有緣,而重逢後就獲得大家的重視與青睞,不管我的測試得到的是指教,還是謾罵.還是扒糞.都我都接受,我想我應該改進的缺點還很多...也會繼續改進,在這裡我不想再針對其他無關測試的回應繼續口水下去,但是只要我的帳號還在,只要是我想要PO的測試,也許是今天PO,或是再等2~3年再PO,都是我的權利 
|
||
|
2003-08-30, 06:43 AM
#2
|
|
|
*停權中*
加入日期: Mar 2003 您的住址: 米國早安州的熱血台灣人
文章: 2,804
|
我只是除虫隊隊員!
|
|
2003-08-30, 09:37 AM
#3
|
|
|
*停權中*
加入日期: Mar 2003 您的住址: 米國早安州的熱血台灣人
文章: 2,804
|
引用:
我看虫是爬太慢被你肌肉夾死! |
|
|
2003-08-30, 09:41 AM
#5
|
|
|
*停權中*
加入日期: Jul 2003
文章: 354
|
近場時機到了~~~~
沒想到死小孩這麼快就要出走了..........   |
|
2003-08-30, 09:49 AM
#6
|
|
|
*停權中*
加入日期: Jul 2003
文章: 354
|
引用:
都已經無空焊了.......大大你還不滿足.......  |
|
|
2003-08-30, 10:05 AM
#8
|
|
|
Golden Member
加入日期: Mar 2003 您的住址: 台中
文章: 3,280
|
引用:
憂大，快敗吧
__________________
相逢自是有緣,而重逢後就獲得大家的重視與青睞,不管我的測試得到的是指教,還是謾罵.還是扒糞.都我都接受,我想我應該改進的缺點還很多...也會繼續改進,在這裡我不想再針對其他無關測試的回應繼續口水下去,但是只要我的帳號還在,只要是我想要PO的測試,也許是今天PO,或是再等2~3年再PO,都是我的權利
|
|
|
2003-08-30, 10:11 AM
#9
|
|
