|
||
|
Power Member
 
加入日期: Nov 2001 您的住址: Texas
文章: 660
|
請問一下用微星6309a VER:1.0的朋友?
我的BIOS好像是1.7吧 我把塞陽900買回來後 裝上去居然開機變成 933 但是在電腦測是測900沒錯 後來又超到1200左右 現在BIOS也只顯示成1.13 要怎麼辦ㄋ~~
__________________
When the Nazis came for the communists, I remained silent; I was not a communist. When they locked up the social democrats, I remained silent; I was not a social democrat. When they came for the trade unionists, I did not speak out; I was not a trade unionist. When they came for the Jews, I remained silent; I was not a Jew. When they came for me, there was no one left to speak out. Martin Niemöller (1892-1984) |
|||||||
2001-12-16, 05:26 PM
#1
|
|
|
*停權中*
加入日期: Oct 2000
文章: 227
|
update v1.9 bios就ok!
|
||
|
2001-12-16, 06:52 PM
#2
|
|
|
Major Member
加入日期: Oct 2001 您的住址: 新竹市
文章: 201
|
我也是這張,目前BIOS update到v1.8,也有900顯示為933的問題~
http://www.msi.com.tw/support/bios/...p?model=MS-6309 不過微星網站上v1.9的Update Description說: 1. Fix problem wherein system will take long time trying to copy file bigger than 10MB from Panasonic ZIP to HDD under DOS. 2. Fix problem when Promise ATA-100 IDE card is installed, the BIOS take long time to detect other peripheral devices. 對我來說似乎沒啥差別,所以就沒更新了~ 另外想請問一下,網站上標明這張主機板v1.0可以用的CPU: Intel Celeron II (Coppermine FCPGA) 1.1GHz Intel PIIIEB (Coppermine, FCPGA, FSB 133) 1000MHz 最高檔就這兩顆嗎??? 還有沒有人試過更快的??? |
|
2001-12-22, 08:50 PM
#3
|
|
