在boot.ini的這行後面加/PAE參數
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XXXXX" /fastdetect

感謝 可以了!!!!
那我還須要加上/3gb這個參數嗎

http://www.microsoft.com/whdc/syste...PAE/PAEmem.mspx

Windows XP Professional and Windows Server 2003 Memory Support. The maximum amount of memory that can be supported on Windows XP Professional and Windows Server 2003 is also 4 GB. However, Windows Server 2003, Enterprise Edition supports 32 GB of physical RAM and Windows Server 2003, Datacenter Edition supports 64 GB of physical RAM using the PAE feature.

The virtual address space of processes and applications is still limited to 2 GB unless the /3GB switch is used in the Boot.ini file. When the physical RAM in the system exceeds 16 GB and the /3GB switch is used, the operating system will ignore the additional RAM until the /3GB switch is removed. This is because of the increased size of the kernel required to support more Page Table Entries. The assumption is made that the administrator would rather not lose the /3GB functionality silently and automatically; therefore, this requires the administrator to explicitly change this setting.

The /3GB switch allocates 3 GB of virtual address space to an application that uses IMAGE_FILE_LARGE_ADDRESS_AWARE in the process header. This switch allows applications to address 1 GB of additional virtual address space above 2 GB.

The virtual address space of processes and applications is still limited to 2 GB, unless the /3GB switch is used in the Boot.ini file. The following example shows how to add the /3GB parameter in the Boot.ini file to enable application memory tuning:


http://www.pcdvd.com.tw/showthread.php?t=492796
http://www.pcdvd.com.tw/showthread.php?t=507543
http://www.pcdvd.com.tw/showthread.php?t=499621