請問一下Fighter大大, 有沒有可能Ti4600改成Q4 980 XGL呢? 聽說Ti4600只對應
到Q4 900 XGL.......

又兩者之間是否只差個4X跟8X的差別而已??

正解...

AGP8X在遊戲上是沒什麼作用(僅高解析時),但在繪圖上卻相差甚遠,主要是充分使用
AGP8X的頻寬,所以Q4 900/980XGL之間速度還是有些差距...

Ti4600僅AGP4X,當然只能改到900XGL,Ti4800才是980XGL,不過亞洲都沒出貨,只
有Ti4800se(Ti4400-8X)而已

http://www.oc.com.tw/article/0302/r...sp?id=1280#Test

thanks for Fighter to remind to change the resolution to test.

my config:
amd 2200+(166X11.5)
windows XP+sp1 1280x1024x32bits
fx5800 mod to softquadrofx2000 (400/800)
driver v44.03 with rivatuner 2rc14 patch files
opengl with verticle aync always off

Run All Summary

---------- SUM_RESULTS\3DSMAX\SUMMARY.TXT
3dsmax-02 Weighted Geometric Mean = 19.76

---------- SUM_RESULTS\DRV\SUMMARY.TXT
drv-09 Weighted Geometric Mean = 116.5

---------- SUM_RESULTS\DX\SUMMARY.TXT
dx-08 Weighted Geometric Mean = 101.0

---------- SUM_RESULTS\LIGHT\SUMMARY.TXT
light-06 Weighted Geometric Mean = 22.35

---------- SUM_RESULTS\PROE\SUMMARY.TXT
proe-02 Weighted Geometric Mean = 33.66

---------- SUM_RESULTS\UGS\SUMMARY.TXT
ugs-03 Weighted Geometric Mean = 42.36

chkwok

Run All Summary

---------- SUM_RESULTS\3DSMAX\SUMMARY.TXT
3dsmax-02 Weighted Geometric Mean = 7.707

---------- SUM_RESULTS\DRV\SUMMARY.TXT
drv-09 Weighted Geometric Mean = 27.02

---------- SUM_RESULTS\DX\SUMMARY.TXT
dx-08 Weighted Geometric Mean = 38.85

---------- SUM_RESULTS\LIGHT\SUMMARY.TXT
light-06 Weighted Geometric Mean = 9.839

---------- SUM_RESULTS\PROE\SUMMARY.TXT
proe-02 Weighted Geometric Mean = 7.309

---------- SUM_RESULTS\UGS\SUMMARY.TXT
ugs-03 Weighted Geometric Mean = 18.47

我重灌了win2000也灌了via 4in one
不過數據還是怪怪的
請問fighter大大directX是否也會影響數據呢
該用8.1還是9 好呢

"""SPEC Viewperf 7.1.1"""

Run All Summary

---------- SUM_RESULTS\3DSMAX\SUMMARY.TXT
3dsmax-02 Weighted Geometric Mean = 8.406

---------- SUM_RESULTS\DRV\SUMMARY.TXT
drv-09 Weighted Geometric Mean = 33.99

---------- SUM_RESULTS\DX\SUMMARY.TXT
dx-08 Weighted Geometric Mean = 58.72

---------- SUM_RESULTS\LIGHT\SUMMARY.TXT
light-06 Weighted Geometric Mean = 14.54

---------- SUM_RESULTS\PROE\SUMMARY.TXT
proe-02 Weighted Geometric Mean = 13.54

---------- SUM_RESULTS\UGS\SUMMARY.TXT
ugs-03 Weighted Geometric Mean = 7.177


請問著個成績正常嗎?我是7.1.1要看清楚喔..^^
GF FX 可以改成 Q FX嗎..

To mmxi

繪圖平台(Win2000 Pro)我都用DirectX8.1

To tw159134

AA Line已死,默哀...

GFX好像可以改,但不是全部...

能教我怎麼改嗎..
我只是個學生買不起Quadro

目前市面上的GFX都已經閹了,僅少數才能釋放完整功能,這可能要麻煩幾位改卡的
大大努力一些...

台啤兄跟九郎兄加油...

敢問Fighter大大, 弟於今晚用RivaTuner14.1更改45.23雷管, 雖說RivaTuner14.1
只支援到42.51, 但仍然可以更改(但在log裡有出現錯誤訊息), 改完後驅動程式可以
安裝完成, 但要測試SPECviewperf7.1的時候, 會在某一項測試當掉, 請問這是驅動
程式照成的呢? 還是本身卡的問題呢?

又有沒有玩家自行更改45.23(即不透過RivaTuner)? 又如果有的話要去哪抓呢?