來鞭屍一下吧
配備如篇名檔所示，ELSA的Quadro4 380XGL

Run All Summary

---------- SUM_RESULTS\3DSMAX\SUMMARY.TXT
3dsmax-02 Weighted Geometric Mean = 8.509

---------- SUM_RESULTS\DRV\SUMMARY.TXT
drv-09 Weighted Geometric Mean = 35.00

---------- SUM_RESULTS\DX\SUMMARY.TXT
dx-08 Weighted Geometric Mean = 52.10

---------- SUM_RESULTS\LIGHT\SUMMARY.TXT
light-06 Weighted Geometric Mean = 16.10

---------- SUM_RESULTS\PROE\SUMMARY.TXT
proe-02 Weighted Geometric Mean = 10.93

---------- SUM_RESULTS\UGS\SUMMARY.TXT
ugs-03 Weighted Geometric Mean = 10.06

AMD平台+Quadro4/FX AGP8X的繪圖卡,效能都相當亮眼,不錯...

PS:的確算是鞭屍了

SPEC Viewperf 7.1的成績

Run All Summary

---------- SUM_RESULTS\3DSMAX\SUMMARY.TXT
3dsmax-02 Weighted Geometric Mean = 10.26

---------- SUM_RESULTS\DRV\SUMMARY.TXT
drv-09 Weighted Geometric Mean = 64.76

---------- SUM_RESULTS\DX\SUMMARY.TXT
dx-08 Weighted Geometric Mean = 72.22

---------- SUM_RESULTS\LIGHT\SUMMARY.TXT
light-06 Weighted Geometric Mean = 20.07

---------- SUM_RESULTS\PROE\SUMMARY.TXT
proe-02 Weighted Geometric Mean = 14.42

---------- SUM_RESULTS\UGS\SUMMARY.TXT
ugs-03 Weighted Geometric Mean = 10.56

不錯的成績,配備? 哪張改的?

不方便說可PM給我,先謝了...

hopson大大的成績不錯喔，能不能透露一下？

測試平台概述:
1.XP 2400+ (200*10)
2.Abit NF7-S
3.A-DATA DDR400 256MBx2
4.G Quadro 900XGL
5.nVidia Quadro driver 43.51
6.Microsoft Windows XP Professional SP1
小弟現醜一下
SPECviewperf 7.1
Run All Summary
---------- SUM_RESULTS\3DSMAX\SUMMARY.TXT
3dsmax-02 Weighted Geometric Mean = 10.88

---------- SUM_RESULTS\DRV\SUMMARY.TXT
drv-09 Weighted Geometric Mean = 40.66

---------- SUM_RESULTS\DX\SUMMARY.TXT
dx-08 Weighted Geometric Mean = 49.41

---------- SUM_RESULTS\LIGHT\SUMMARY.TXT
light-06 Weighted Geometric Mean = 16.69

---------- SUM_RESULTS\PROE\SUMMARY.TXT
proe-02 Weighted Geometric Mean = 12.55

---------- SUM_RESULTS\UGS\SUMMARY.TXT
ugs-03 Weighted Geometric Mean = 17.84

GZeasy 子像素精度比較

繼續鞭屍ing...

my config:
amd 2200+(166X11.5)
windows XP+sp1 800x600x32bits
fx5800 mod to softquadrofx2000 (400/800)
driver v44.03 with rivatuner 2rc14 patch files
opengl with verticle asy always off
Run All Summary

---------- SUM_RESULTS\3DSMAX\SUMMARY.TXT
3dsmax-02 Weighted Geometric Mean = 19.88

---------- SUM_RESULTS\DRV\SUMMARY.TXT
drv-09 Weighted Geometric Mean = 122.3

---------- SUM_RESULTS\DX\SUMMARY.TXT
dx-08 Weighted Geometric Mean = 102.2

---------- SUM_RESULTS\LIGHT\SUMMARY.TXT
light-06 Weighted Geometric Mean = 22.36

---------- SUM_RESULTS\PROE\SUMMARY.TXT
proe-02 Weighted Geometric Mean = 34.11

---------- SUM_RESULTS\UGS\SUMMARY.TXT
ugs-03 Weighted Geometric Mean = 45.40


I remind that rivatuner is only work on v44.03

測SPEC Viewperf V7.1請用官方認可的解析度(1280*1024*32bit),比較好比較

QFX2000(雷管45.23/其餘配備在簽名檔)

Run All Summary

---------- SUM_RESULTS\3DSMAX\SUMMARY.TXT
3dsmax-02 Weighted Geometric Mean = 24.96

---------- SUM_RESULTS\DRV\SUMMARY.TXT
drv-09 Weighted Geometric Mean = 141.5

---------- SUM_RESULTS\DX\SUMMARY.TXT
dx-08 Weighted Geometric Mean = 129.9

---------- SUM_RESULTS\LIGHT\SUMMARY.TXT
light-06 Weighted Geometric Mean = 30.42

---------- SUM_RESULTS\PROE\SUMMARY.TXT
proe-02 Weighted Geometric Mean = 39.73

---------- SUM_RESULTS\UGS\SUMMARY.TXT
ugs-03 Weighted Geometric Mean = 42.60

Run All Summary

---------- SUM_RESULTS\3DSMAX\SUMMARY.TXT
3dsmax-02 Weighted Geometric Mean = 3.955

---------- SUM_RESULTS\DRV\SUMMARY.TXT
drv-09 Weighted Geometric Mean = 11.37

---------- SUM_RESULTS\DX\SUMMARY.TXT
dx-08 Weighted Geometric Mean = 19.72

---------- SUM_RESULTS\LIGHT\SUMMARY.TXT
light-06 Weighted Geometric Mean = 3.624

---------- SUM_RESULTS\PROE\SUMMARY.TXT
proe-02 Weighted Geometric Mean = 3.381

---------- SUM_RESULTS\UGS\SUMMARY.TXT
ugs-03 Weighted Geometric Mean = 14.94

我的數據好奇怪.只有ug有到標準其他的都異常的低耶
請各位前輩幫我看看是哪裡出了問題(垂直同步也關了)

我的配備
AMD XP2500
GA-V7A
DDR333 512MB
Q900XGL(改)
DRIVER 52.16 及45.23 測出來都一樣