|
||
|
Senior Member
 
加入日期: Dec 2000 您的住址: 居無定所
文章: 1,421
|
樓上大大的圖很壯觀
不過是不是很客觀這倒是不一定 根據測試的網站所說 The software we used for the measurements is the KProbe, and the reader is LiteOn XJ-HD-165H. The specific methodology is very depended on the drive we use as a reader. The reliability of the PI/PO provided output is also not technically confirmed. As a result, we cannot safely come up with absolute results, but we are allowed to compare the behavior of the drive with various DVD recordable/rewritable media, since this seems currently our only feasible approach. 而且每張DVD測出來圖都不大一樣 哀 個人覺得機器好不好都得用個兩年才真的知道
__________________
沒有會員卡號的簽名檔 |
|||||||
2003-07-24, 03:47 AM
#21
|
|
|
Basic Member
加入日期: Jul 2003
文章: 27
|
嘿~ Pioneer A06入手！真高興！ \ ^.^ /
但因為沒先想好要怎麼安排IDE順序，摸了一整個上午，真頭痛... / *.* \ 結果： Primary Master : DVD Burner Primary Slave: DVD-Rom Secondary Master: CD Burner Secondary Salve: 從缺... 現在是用主機板內建的ATA controller 來 boot 三顆硬碟都在那上面 高手看了請勿見笑，小弟實在想不出更好的方法了 因為板上的controller只有支援ATA100/ATA133 又不想放棄CD Burner, 留著也可為DVD Burner分憂解勞一下 若有建議，煩請不吝指教 |
||
|
2003-07-25, 02:10 AM
#22
|
|
|
Senior Member
加入日期: Dec 2001
文章: 1,354
|
引用:
恭喜啦  我也好想買一台DVD燒錄機 不過在硬碟沒滿或者沒壞前還是得忍著不下手 關於位置換成這樣如何呢 Primary Master: DVD-Rom Secondary Master : DVD Burner Secondary Slave: CD Burner DVD-Rom放Primary Master是為了方便光碟開機 DVD燒錄機和CD燒錄機放在一起是因為同時使用的機會不高 這是我個人的考量啦 給你參考 |
|
|
2003-07-25, 04:26 AM
#23
|
|
|
Basic Member
加入日期: Jul 2003
文章: 27
|
謝謝tosleep兄的建議
不過我想DVD-ROM和DVD-Burner還是放在一起好了 方便對燒 ^^ 好像有這樣的說法... |
|
2003-07-26, 07:53 AM
#24
|
|
