用Alcohol 120% 1.9.2.1705

資料類型選SecuROM *New (4.x/5.x)

知道了，我試試看。

嗯，寒冷霸權可以COPY，

那麼主程式呢？我COPY下不來...

資料格式選"General Protected CD"或"Normal CD"

做是做出來了，但是都會燒出飛盤...

The Choas Reion和The Frozen Throne都一樣，

直接模擬也不行，
會有下面的畫面....

剛剛無聊重灌，還是不行...

直接找NOCD應該比較方便吧
另外魔獸3主程式防拷應該是SafeDisc2.53(沒記錯的話 )
那個版本小弟當初用clonecd硬拷就行了
應該也沒必要動到模擬選項
年代久遠記錯不要打我

又會不會是樓主cd判讀已經出現問題

建議用這個軟體去掃描光碟片的防拷類型

點我下載

http://club.cdfreaks.com/showthread.php?t=78260

^^

這是我整理過的
1.
Start by making an image of the play cd of the game you want to copy.
The datatype setting to use is securom new (not securom new 4.x) for this purpose and
the image must be saved in CloneCD format and not in alcohol’s native format.
Reading speed doesn’t matter. Max speed will be fine.

2.
Next make a bwa file.
To make a bwa file, you need to use blindwrite's bwa builder.

a)
To make an mds file with alcohol simply make an image of the play cd using securom new 4.x settings in mds/mdf format.
When you're asked to select the measuring speed for the DPM function, again you'll probably get better results at low speed(1x to 8x).
When it's finished making the image files, run the bwa builder and load the mds file by clicking on File and then Load BWA/MDS.
If the graph looks ok then create a .bwa file by clicking on File and then Convert MDS -> BWA.
This will create a .bwa file in the same folder as your .mds file.
You can then delete the mds/mdf files as they're no longer needed.

3.
Now it's time to patch the image files.
Start Twinpeak and in the Options select the twin sector step.
I just use the default of 15 as it works fine for me.
However, 6 and 50 are also known to work.
Select the .ccd file and the .bwa file and then click Start.
Twinpeak will then tell you where it will insert twinsectors and when you click OK it will patch the image files.
When it's finished, you'll have three new files in the same folder where you saved the original image files.
Those files will be patched.ccd, patched.img and patched.sub.

4.
Just start alcohol's image burning wizard and burn patched.ccd using the securom new (not securom new 4.x) datatype setting.
Because this type of copy is anything but standard, out of an abundance of caution,
you'll probably get better results if you burn at relatively low speed (say 8x).
[Note: Before burning you'll be warned that the image size doesn't match the lead-out specified in the toc and you'll be given three burning options.
The first option is correct: "Keep TOC as on source cd, write until end of image file".]

====================
主程式直接燒既可
資料片須上上方式才能燒中 1:1 的片子, 注意!! 此片無法再拿來 copy, 所以需要母片來製作, 建議把 patch 完的印象檔, 再以檔案形式被份起來~