|
||
|
Basic Member
加入日期: Dec 2001
文章: 19
|
Oxford 911 external box
Hi do anyone can help me because I got a liteon 411>811s in an external box
(1394+USB 2) box with Oxford chips when I connect with USB 2.0 everything OK, but when I connect though 1394, I only got a Oxford Removal device (can read and write) anything on it. So anyone can tell me any idea or do I need the 1394 driver?? Thanks for everyone |
|||||||
2004-02-27, 12:50 AM
#1
|
|
|
Major Member
 加入日期: Dec 2001
文章: 117
|
回覆: Oxford 911 external box
引用:
so..... Now, do you try to put other driver(HD or....)into the Box then connect with the IEEE1394. I have one Oxford 911 1394 3.5" box. I don't have any problem with connection. |
|||
|
2004-02-27, 02:54 AM
#2
|
|
|
*停權中*
加入日期: Feb 2000 您的住址: Terra firma
文章: 251
|
The Oxford IEEE 1394 driver is build-in in Windows XP (also in Win98 too!). You don't need any driver for it. If there are both USB 2.0 & IEEE 1394 connections available, I prefer the IEEE 1394.
|
|
2004-02-27, 08:04 AM
#3
|
|
|
Basic Member
加入日期: Feb 2004 您的住址: 阿諾主政的夭壽州
文章: 22
|
1394 does not require any driver under WinXP, Check your PC 1394 device. Make sure 1394 it is enable.
|
|
2004-02-27, 11:20 AM
#4
|
|
|
New Member
加入日期: Jun 2002
文章: 1
|
Hey,
If your burner's jumper was set as Mater, try set it as slave. I believe that will work. Good luck to you!! |
|
2004-02-27, 01:35 PM
#5
|
|
|
Major Member
加入日期: Sep 2002 您的住址: 台北縣
文章: 173
|
回覆: Oxford 911 external box
引用:
What's bland 1394 card do you use? I had test DOMEX 1394 card & Oxford 911, it can recording 7.8X fine, and I use DW800A recorder.
__________________
偶不是蒙面人，只是有黑眼圈所以戴面具啦！ |
|
|
2004-02-27, 04:36 PM
#6
|
|
|
Senior Member
加入日期: Jul 2002 您的住址: 光碟托盤
文章: 1,495
|
try to update the firmware of 911
in some cases the manufactures sets the type of device if will accept to HD only. |
|
2004-02-27, 05:45 PM
#7
|
|
|
Basic Member
加入日期: Dec 2001
文章: 19
|
Thanks for all
Chage the drive from slave to master problem fixed Thanks for all,s idea |
|
2004-02-28, 01:27 AM
#8
|
|
