PCDVD數位科技討論區
PCDVD數位科技討論區   註冊 常見問題 標記討論區為已讀

回到   PCDVD數位科技討論區 > 電腦硬體討論群組 > 系統組件
帳戶
密碼
 

  回應
 
主題工具
阿帆
Master Member
 

加入日期: Aug 2002
您的住址: 嘉義&斗六
文章: 1,924
引用:
Originally posted by 怪盜加州蘋果
Interrupt Mode.
BIOS 的default setting很可能是APIC, 但APIC是給win2k用. winme應該設置為PIC.

你說的選項我找不到耶~~
我只找到APIC Function(APIC功能)
進階可程式中斷訊號控制器~你說的是這個嗎?
     
      
舊 2003-02-07, 12:51 AM #21
回應時引用此文章
阿帆離線中  
markwon
New Member
 

加入日期: Feb 2003
您的住址: 台北
文章: 1
我的經驗

你可以換RAM或光碟機試試看,通常藍底白字都是RAM的問題
 
__________________
只賣給有緣人
0931190657
舊 2003-02-07, 06:56 AM #22
回應時引用此文章
markwon離線中  
mokog123
*停權中*
 

加入日期: Dec 2001
您的住址: 台中市位台灣中部,舊名「大墩」
文章: 3,106
引用:
Originally posted by 阿帆
對了,我把新買的硬碟設在MASTER,舊的硬碟要設在SL...(忘了!)
不過舊的硬碟上竟然沒說JUMPER要怎麼設!!挖勒~
請問有人知道MAXTOR 20G 5400RPM(32049H2)的JUMPER要怎麼設嗎?
他的JUMPER是我原本是插在左邊數來第2排的針腳上,後來把他改到左邊數來第3排的針腳上,就可以用了,不知道我設的位置是什麼??

請看你硬碟上圖示,不然來這裡看到下方http://www.maxtor.com/en/support/
在最右邊選擇你硬碟型號,之後詳細資料

(Master)
The vertical jumper over the J50 pins is configuring the drive as a Master.
(Master with CLJ)
The vertical jumper over the J50 pins is configuring the drive as a Master.
The vertical jumper over the J46 pins is in the Cylinder Limitation position (CLJ).
(Slave)
No jumper is required to configure the drive as a Slave.
The jumper over the J44 and J42 positions is in the jumper storage position.
(Slave with CLJ)
The jumper over the J44 and J42 positions is in the jumper storage position.
The jumper over the J46 pins is in the Cylinder Limitation position (CLJ).
(Cable Select)
The jumper over the J48 position is configuring the drive for Cable Select.
(Cable Select with CLJ)
The jumper over the J48 position is configuring the drive for Cable Select.
The jumper over the J46 pins is in the Cylinder Limitation position (CLJ).
舊 2003-02-07, 07:58 AM #23
回應時引用此文章
mokog123離線中  
怪盜加州蘋果
Major Member
 

加入日期: Aug 2002
您的住址: 蘋果園
文章: 143
引用:
Originally posted by 阿帆
你說的選項我找不到耶~~
我只找到APIC Function(APIC功能)
進階可程式中斷訊號控制器~你說的是這個嗎?


對, 是這個. Disable它吧.
舊 2003-02-07, 09:54 AM #24
回應時引用此文章
怪盜加州蘋果離線中  
阿帆
Master Member
 

加入日期: Aug 2002
您的住址: 嘉義&斗六
文章: 1,924
引用:
Originally posted by mokog123
請看你硬碟上圖示,不然來這裡看到下方http://www.maxtor.com/en/support/
在最右邊選擇你硬碟型號,之後詳細資料

(Master)
The vertical jumper over the J50 pins is configuring the drive as a Master.
(Master with CLJ)
The vertical jumper over the J50 pins is configuring the drive as a Master.
The vertical jumper over the J46 pins is in the Cylinder Limitation position (CLJ).
(Slave)
No jumper is required to configure the drive as a Slave.
The jumper over the J44 and J42 positions is in the jumper storage position.
(Slave with CLJ)
The jumper over the J44 and J42 positions is in the jumper storage position.
The jumper over the J46 pins is in the Cylinder Limitation position (CLJ).
(Cable Select)
The jumper over the J48 position is configuring the drive for Cable Select.
(Cable Select with CLJ)
The jumper over the J48 position is configuring the drive for Cable Select.
The jumper over the J46 pins is in the Cylinder Limitation position (CLJ).

這位大大,謝謝你囉~
舊 2003-02-08, 01:17 AM #25
回應時引用此文章
阿帆離線中  
阿帆
Master Member
 

加入日期: Aug 2002
您的住址: 嘉義&斗六
文章: 1,924
引用:
Originally posted by 怪盜加州蘋果
對, 是這個. Disable它吧.

請問關掉這個有什麼作用啊??
舊 2003-02-08, 01:19 AM #26
回應時引用此文章
阿帆離線中  
天昏地暗
Elite Member
 
天昏地暗的大頭照
 

加入日期: Mar 2001
您的住址: 桃園縣龜山鄉
文章: 12,765
引用:
Originally posted by 阿帆
請問關掉這個有什麼作用啊??

就不會用到超過15的IRQ,不知道對不對
阿帆,A7N8X買了沒,快一點買啦
__________________
請不要再用打的方式教育小狗,有愛心的人請買以下的書來讀好嗎??謝謝您
別只給我一根骨頭
狗狗的異想世界
貓狗大戰:寵物行為四週集訓
愛咪咪的異想世界
終於還完12x萬的負債,以後不敗家了
阿斗的歷史名言:此間樂,不思蜀
舊 2003-02-08, 03:32 AM #27
回應時引用此文章
天昏地暗離線中  
阿帆
Master Member
 

加入日期: Aug 2002
您的住址: 嘉義&斗六
文章: 1,924
引用:
Originally posted by 天昏地暗
就不會用到超過15的IRQ,不知道對不對
阿帆,A7N8X買了沒,快一點買啦

1.真的不知道><"是系統會較穩定嗎?
2.等下禮拜我開學後就會買啦~
這種高級的玩意,要等我去嘉義後再買,斗六這可憐的小地方應該是不會有啦,就算有價錢也應該.....
舊 2003-02-09, 06:02 PM #28
回應時引用此文章
阿帆離線中  


    回應


POPIN
主題工具

發表文章規則
不可以發起新主題
不可以回應主題
不可以上傳附加檔案
不可以編輯您的文章

vB 代碼打開
[IMG]代碼打開
HTML代碼關閉



所有的時間均為GMT +8。 現在的時間是02:36 PM.


vBulletin Version 3.0.1
powered_by_vbulletin 2026。