|
||
|
Senior Member
 加入日期: Oct 2004 您的住址: 溪水湖泊
文章: 1,258
|
Intel® Chipset Software Installation Utility
ftp://aiedownload.intel.com/df-supp...finst_autol.exe 先裝裝看吧 |
|||||||
2005-03-27, 02:19 PM
#11
|
|
|
Major Member
加入日期: Dec 2004
文章: 293
|
可是~~我的電腦是SP1> <
我剛剛查過了 |
||
|
2005-03-27, 02:46 PM
#12
|
|
|
Basic Member
加入日期: Mar 2005 您的住址: TAIWAN
文章: 19
|
引用:
請教你外接的USB有全部都出問題嗎? 我之前外接的顯示的錯誤訊息跟樓主的一樣唷 之後將外接的硬體JUMP調過之後就搞定了 ~TRY IT
__________________
 哪一牌子的掃把最爛? 就是火鳥...因為燃燒吧(爛掃把)!燃燒吧(爛掃把)!火鳥.... 此文章於 2005-03-27 02:51 PM 被 38alex 編輯. |
|
|
2005-03-27, 02:48 PM
#13
|
|
|
Amateur Member
 加入日期: Oct 2001
文章: 42
|
首先,這是因為第一版的WindowsXP並未支援EHCI控制器(也就是USB2.0)微軟是因為兩個理由而未支援:
1. There were no production quality EHCI 1.0 compatible host controllers. 2. There were not enough production-quality USB 2.0 devices for testing. 關於這點,微軟已經於SP1中加入支援. 其次,如果您安裝了SP1而還有以上情形者,微軟也提供排除錯誤的方式: 1. Open Device Manager. Locate Devices by Type. 2. Right-click USB 2.0 EHCI Host controller, and then click Update Driver. You can find the USB Host controller entry in either of the following locations: • Universal Serial Bus Controllers. • Other Devices Note In the Other Devices location, the USB Host controller entry is labeled Universal Serial Bus controller with a yellow exclamation mark. 3. Click Install the software automatically (Recommended), and then click Next. 4. Click Finish when installation is finished. Note You may receive a message to restart your computer to finish the installation. 最後,微軟再SP1之後也提供一些USB的更新檔,所以如果你還解決不了就裝SP2看看吧.... 如果連SP2也不行,那就從硬體設定去排除吧  |
|
2005-03-27, 04:43 PM
#14
|
|
|
Major Member
加入日期: Jul 2002
文章: 288
|
嗨∼∼
其實你只要去bios設定為high speed 就OK了 我也是用p4p800se 的版本 ^^ |
|
2005-03-27, 07:44 PM
#15
|
|
|
Major Member
加入日期: Dec 2004
文章: 293
|
引用:
恩~~這些之前已有設定過了 還是沒辦法@@ |
|
|
2005-03-27, 08:35 PM
#16
|
|
