NEC 偽4551 燒DL失敗
有人看得懂Nero 8的錯誤訊息嗎?
是燒錄機? 片子? 軟體? 系統? 哪種的問題?


NEC 偽4551
Firmware Version:1.08- 62Fjkteng 修改的版本
燒錄軟體:Nero 8免安裝檔
DL片子: KOKOLO 2.4X DVD+R Double Layer



Nero 8給的錯誤訊息:

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 703MB (720368kB)
Free physical memory: 302MB (309856kB)
Memory in use : 56 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

28.8.2008
UDF編製
下午 01:01:44 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

下午 01:01:45 #2 Text 0 File Isodoc.cpp, Line 6671
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical

下午 01:01:46 #3 Text 0 File Burncd.cpp, Line 3530
Turn on Disc-At-Once, using DVD media

下午 01:01:46 #4 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'

下午 01:01:46 #5 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 4103071 (911:47.46, 8013MB)

下午 01:01:46 #6 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

下午 01:01:46 #7 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: _NEC DVD_RW ND-4551A, Media type: DVD+R DL

下午 01:01:46 #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

下午 01:01:46 #9 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 4103072 (4103072) = #4103072/911:47.47
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4103072 blocks [J: _NEC DVD_RW ND-4551A]
--------------------------------------------------------------

下午 01:01:46 #10 Text 0 File ThreadedTransferInterface.cpp, Line 986
Prepare [J: _NEC DVD_RW ND-4551A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8403091456, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 4103072 | 0 | 0x00
4103072 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

下午 01:01:46 #11 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

下午 01:01:46 #12 Text 0 File Burncd.cpp, Line 4316
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

下午 01:01:46 #13 Phase 24 File dlgbrnst.cpp, Line 1764
Caching of files started

下午 01:01:46 #14 Text 0 File Burncd.cpp, Line 4435
Cache writing successful.

下午 01:01:46 #15 Phase 25 File dlgbrnst.cpp, Line 1764
Caching of files completed

下午 01:01:46 #16 Phase 36 File dlgbrnst.cpp, Line 1764
Burn process started at 2.4x (3,324 KB/s)

下午 01:01:46 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2735
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

下午 01:01:46 #18 Text 0 File DVDPlusDualLayer.cpp, Line 495
Disc finalized, LBA total Image size: 4103072 (8013MB), Last LBA L0: 2051535 (4006MB)

下午 01:02:15 #19 SPTI -1066 File SCSIPassThrough.cpp, Line 181
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 21 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07
Buffer x07e6d040: Len x804

下午 01:02:15 #20 Text 0 File DVDPlusDualLayer.cpp, Line 660
L0 Data Zone Capacity set to 2051536 (1F4DD0h, 4006MB) -> OK, confirmed setting

下午 01:02:15 #21 CDR -1205 File DVDPlusDualLayer.cpp, Line 687
Burning Layer 1

下午 01:02:15 #22 Text 0 File DVDPlusDualLayer.cpp, Line 697
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode

下午 01:02:15 #23 SPTI -1066 File SCSIPassThrough.cpp, Line 181
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07
Buffer x07e6d040: Len x804

下午 01:02:15 #24 Text 0 File DVDR.cpp, Line 6748
Drive: _NEC DVD_RW ND-4551A
Book Type request [NEC]: DVD-ROM, write to RAM
select Book Type setting from RAM
Changing the Book Type was finished successfully, return code 0

下午 01:02:15 #25 CDR -1207 File DVDR.cpp, Line 6452
Book Type automatically set to: DVD-ROM

下午 01:02:15 #26 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes

下午 01:02:15 #27 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 83836800

下午 01:19:35 #28 SPTI -1093 File SCSIPassThrough.cpp, Line 181
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1093)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 00 00 18 42 80 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 02
Buffer x0d221840: Len x10000
0xA2 3C 63 1C 47 B8 F8 19 20 B5 F9 A0 81 2D C9 AD
0x23 0A 6D CD B7 4D 41 1D 1C 4D 1E 45 E6 5F A8 E6
0x9C 28 55 8F D6 39 B7 4C 4F 68 BB E2 C3 7E 48 4A

下午 01:19:35 #29 CDR -1093 File Writer.cpp, Line 306
No seek complete
J: _NEC DVD_RW ND-4551A

下午 01:19:40 #30 SPTI -1135 File SCSIPassThrough.cpp, Line 181
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C

下午 01:19:41 #31 SPTI -1176 File SCSIPassThrough.cpp, Line 181
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 03

下午 01:19:41 #32 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 1589888

下午 01:19:42 #33 Text 0 File DVDR.cpp, Line 6748
Drive: _NEC DVD_RW ND-4551A
Book Type request [NEC]: DVD-ROM, write to RAM
select Book Type setting from RAM
Changing the Book Type was finished successfully, return code 0

下午 01:19:42 #34 CDR -1176 File WriterStatus.cpp, Line 162
Session fixation error
J: _NEC DVD_RW ND-4551A

下午 01:19:42 #35 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

下午 01:19:48 #36 Phase 38 File dlgbrnst.cpp, Line 1764
Burn process failed at 2.4x (3,324 KB/s)

下午 01:19:49 #37 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

下午 01:19:52 #38 Text 0 File Cdrdrv.cpp, Line 11276
DriveLocker: UnLockVolume completed

下午 01:19:52 #39 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL