|
||
|
Advance Member
  
加入日期: Oct 2001 您的住址: 飛的國度
文章: 438
|
怎麼開啟16:9顯示模式
我的顯示是GMA X3100
筆電是acer 2920 因為我買了一台16:9的LCD 想把筆電畫面輸出到LCD上面 解析只能調整成 1280X800 所以上LCD後會怪怪的 可是又沒有1280X720或1366X768之類的 顯示控制台內只有16:10跟4:3的解析度可以選擇 請問該怎麼開啟或修改 才可以有1280x720或1920x1080的解析等解析呢
__________________
追飛就是...一種追求飛的快感的感覺∼ 
|
|||||||
2009-07-04, 03:38 PM
#1
|
|
|
Master Member
加入日期: Apr 2003 您的住址: Kaohsiung
文章: 1,979
|
引用:
可以試試直接灌 Intel 官網的驅動程式看看: http://www.intel.com/support/graphics/sb/cs-029955.htm
__________________
2025.08.12 Edited CPU:Intel Core i7-14700 SRN40 MainBoard:ASUS ROG STRIX B760-A GAMING WIFI BIOS 1805 RAM:Kingston FURY Beast Black DDR5-5600 32GB (2*16GB) VGA Card:ASUS Dual Radeon RX 6650 XT Adrenalin Edition 25.8.1 SSD0:Solidigm P44 Pro 1TB HDD0:WD GOLD 8TB WD8004FRYZ HDD1:WD GOLD 8TB WD8005FRYZ HDD2:Seagate EXOS 7E8 6TB ST6000NM0115 Monitor:ViewSonic VX2476-smhd LAN Card:Intel Gigabit ET Dual Port Server Adapter Sound Card:Creative Sound Blaster Z Power:Seasonic FOCUS GX-750 ATX 3.1(750W) Mouse:Logitech G102 Lightsync RGB Case:PC-7N OS:Win11 Professional x64 Version 24H2 |
|||
|
2009-07-05, 09:13 AM
#2
|
|
|
Advance Member
加入日期: Oct 2001 您的住址: 飛的國度
文章: 438
|
引用:
我的是BENQ T2200HDA 我已安裝graphics driver version 14.37.1.5029 (6.14.10.5029) 也就是最新的驅動了 會是LCD的差別嗎 還是輸入線也有差呢? 我是用D-SUB對接的 另外 我在驅動程式內的igxp32.inf內有發現一行文 是不是跟這個有關係呢 ---------------------------------- [NonEDIDMode_AddSwSettings] HKR,, TotalDTDCount, %REG_DWORD%, 0 ; This shows number of DTDs to be used. ; 0-->Disable the feature. ;Following keys have 20 bytes (18 byte DTD + 2 Byte flags). HKR,, DTD_1,%REG_BINARY%, 01,1D,80,18,71,1C,16,20,58,2C,1A,00,00,00,00,00,00,86,37,01 ;[email protected] HKR,, DTD_2, %REG_BINARY%, 01,1D,80,D0,72,1C,16,20,10,2C,1A,80,00,00,00,00,00,86,37, 01 ;[email protected] HKR,, DTD_3,%REG_BINARY%, 01,1D,00,BC,52,D0,1E,20,B8,28,25,40,00,00,00,00,00,04,37, 01 ;[email protected] HKR,, DTD_4, %REG_BINARY%, 01,1D,00,72,51,D0,1E,20,6E,28,25,00,00,00,00,00,00,06,37,01 ;[email protected] HKR,, DTD_5,%REG_BINARY%, 00, 00, 00 ,00, 00, 00,00, 00, 00,00, 00, 00,00, 00, 00,00, 00, 00,00, 00 ;Fifth DTD [NonEDIDMode_DelSwSettings] HKR,, TotalDTDCount HKR,, DTD_1 HKR,, DTD_2 HKR,, DTD_3 HKR,, DTD_4 HKR,, DTD_5 ------------------ 感謝高手解答
__________________
追飛就是...一種追求飛的快感的感覺∼
此文章於 2009-07-05 12:25 PM 被 a-jia 編輯. |
|
|
2009-07-05, 12:19 PM
#3
|
|
|
Advance Member
加入日期: Oct 2001 您的住址: 飛的國度
文章: 438
|
終於解決了..........
因為看起來實在是跟這邊有關 我把igxp32.inf內的這幾行稍微修改了一下 [NonEDIDMode_AddSwSettings] HKR,, TotalDTDCount, %REG_DWORD%, 0 ; This shows number of DTDs to be used. ; 0-->Disable the feature. ---------------- 我把dword後面的0改成1 我自己想像照後面的字義應該是開啟的意思 ;Following keys have 20 bytes (18 byte DTD + 2 Byte flags). HKR,, DTD_1,%REG_BINARY%, 01,1D,80,18,71,1C,16,20,58,2C,1A,00,00,00,00,00,00,86,37,01 ;[email protected] HKR,, DTD_2, %REG_BINARY%, 01,1D,80,D0,72,1C,16,20,10,2C,1A,80,00,00,00,00,00,86,37, 01 ;[email protected] HKR,, DTD_3,%REG_BINARY%, 01,1D,00,BC,52,D0,1E,20,B8,28,25,40,00,00,00,00,00,04,37, 01 ;[email protected] HKR,, DTD_4, %REG_BINARY%, 01,1D,00,72,51,D0,1E,20,6E,28,25,00,00,00,00,00,00,06,37,01 ;[email protected] HKR,, DTD_5,%REG_BINARY%, 00, 00, 00 ,00, 00, 00,00, 00, 00,00, 00, 00,00, 00, 00,00, 00, 00,00, 00 ;Fifth DTD ---------------- 接下來把1280x720後面的"Non-interlaced"改成"interlaced" 重新安裝後 雖然會出現未被認證的驅動程式 可是安裝完就有出現1920x1080的選項了 真是的= = 平平都是官網載的驅動 為什麼我的要特別修改才會出現16:9的模式阿........
__________________
追飛就是...一種追求飛的快感的感覺∼
|
|
2009-07-05, 01:21 PM
#4
|
|
