![]() |
||
Amateur Member
![]() 加入日期: Oct 2003
文章: 32
|
[求助]MEPG4的檔案播放時會有殘影、馬賽克
請教大大
我除了裝AC3Filter之外,我就只有裝klcodec,原本還以為是klcodec的版本太舊,於是移除舊版本後重新安裝klcodec246f,結果還是會有殘影、馬賽克。 我用GSpot2.52看,在左下角Proposed Codec Solutions and Tests的GSpot的Vid的2有發現下列訊息: (Src)->(A)->[AVI Splitter]->(B)->[DivX Decoder Filter]->(C)->[Video Renderer] Failed to connect Output pin 0x009a266c ("Stream 00") on AVI Splitter to input pin 0x009a64ec ("XForm In") on filter 0x0241ad6a ("DivX Decoder Filter"). ConnectDirect() failed. Error: 0x80040207: There is no common media type between these pins. 該如何解呢? 謝謝! |
|||||||
![]() |
![]() |
Regular Member
![]() ![]() 加入日期: Oct 2003
文章: 52
|
1.若您擔心目前安裝了過多的編碼器,導致彼此之間互相發生衝突而造成影片播放不順,可以用mmview試看看,用滑鼠右鍵點取想要修改設定的編碼器,接著在右鍵選要「Enable」或者「Disable」即可
http://www.nirsoft.net/utils/mimeview.zip ![]() 2.Failed to connect Output會不會是來源檔的問題,用vlc播看看 http://a1.edskes.com/v/videolan081.exe |
||
![]() |
![]() |
Amateur Member
![]() 加入日期: Oct 2003
文章: 32
|
感謝回覆,我再試試看!
|
![]() |
![]() |