I was using PIONEER DVD-RW DVR-108 to Burn Some DVD.....
After Wasting 8 PIONEER 8x DVD-R all because of this Invalid block address, I want to know WHY >"<

I'm Using Acer TravelMate 292xci, with an external Case for PIONEER DVD-RW DVR-108 USB 2.0...

Buring 9 DVD's Only 1 Made it~ Here is the Log

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 2004/7/22 下午 05:33:44
Nero version: 6.3.1.20
Recorder: <PIONEER DVD-RW DVR-108> Version: 1.06 - HA 1 TA 0 - 6.3.1.20
Adapter driver: <> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PIONEER DVD-RW DVR-108 >Version: 1.06 - HA 1 TA 0 - 6.3.1.20
Adapter driver: <> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IC25N040ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : Slimtype COMBO LSC-24082K atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-108 F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 208MB (213560kB)
Memory in use : 59 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

14.9.2004
ISO compilation
下午 10:08:43 #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : Multibyte
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

下午 10:08:43 #2 Text 0 File Reader.cpp, Line 126
Reader running

下午 10:08:43 #3 Text 0 File Writer.cpp, Line 124
Writer PIONEER DVD-RW DVR-108 running

下午 10:08:43 #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

下午 10:08:43 #5 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-at-once, using DVD media

下午 10:08:44 #6 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 845215 (187:49.40, 1650MB)

下午 10:08:44 #7 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)

下午 10:08:44 #8 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: PIONEER DVD-RW DVR-108, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193

下午 10:08:44 #9 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================

下午 10:08:44 #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 845216 (845216) = #845216/187:49.41
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 845216 blocks [PIONEER DVD-RW DVR-108 ]
--------------------------------------------------------------

下午 10:08:44 #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [PIONEER DVD-RW DVR-108 ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1731002368, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
845216 | lead-out | 1 | 0x00 | 0x41

下午 10:08:44 #12 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started

下午 10:08:44 #13 Text 0 File Burncd.cpp, Line 4183
Cache writing successful.

下午 10:08:44 #14 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed

下午 10:08:44 #15 Phase 32 File dlgbrnst.cpp, Line 1855
Simulation started at 4x (5,540 KB/s)

下午 10:08:44 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

下午 10:08:44 #17 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 5:30,094 (330094ms) -> OK

下午 10:08:44 #18 Text 0 File DVDR.cpp, Line 1942
Recording mode: Sequential Recording Mode

下午 10:08:44 #19 Text 0 File Mmc.cpp, Line 20531
Set BUFE: supported -> ON

下午 10:08:44 #20 Text 0 File DVDR.cpp, Line 2083
Start write address at LBA 0
DVD high compatibility mode: Yes

下午 10:08:44 #21 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

下午 10:08:47 #22 Text 0 File Cdrdrv.cpp, Line 1294
22:08:47.547 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later

下午 10:09:07 #23 Text 0 File Cdrdrv.cpp, Line 1294
22:09:07.756 - PIONEER DVD-RW DVR-108\H1 T0 : Queue again later

下午 10:14:19 #24 Text 0 File WriterStatus.cpp, Line 115
<PIONEER DVD-RW DVR-108 > start writing Lead-Out at LBA 845216 (CE5A0h), lenght 0 blocks

下午 10:14:19 #25 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

下午 10:14:19 #26 Text 0 File DVDR.cpp, Line 2325
EndDAO: Last written address was 845215

下下午 10:14:24 #29 Phase 33 File dlgbrnst.cpp, Line 1855
Simulation completed successfully at 4x (5,540 KB/s)




OK~~ Then Rest All End Up Like this.................


上午 12:01:44 #15 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 4x (5,540 KB/s)

上午 12:01:44 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

上午 12:01:44 #17 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 14:07,986 (847986ms) -> OK

上午 12:01:44 #18 Text 0 File DVDR.cpp, Line 1942
Recording mode: Sequential Recording Mode

上午 12:01:44 #19 Text 0 File Mmc.cpp, Line 20531
Set BUFE: supported -> ON

上午 12:01:44 #20 Text 0 File DVDR.cpp, Line 2083
Start write address at LBA 0
DVD high compatibility mode: Yes

上上午 12:01:50 #22 Text 0 File Cdrdrv.cpp, Line 1294
00:01:50.374 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later

上午 12:02:41 #23 SCSI -1064 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x032F0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0xCC 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x21 0x02

上午 12:02:41 #24 CDR -1064 File Writer.cpp, Line 304
Invalid block address
.

上午 12:02:44 #30 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 4x (5,540 KB/s)


After doing this for 8 times....I've Started to use Simulation First, Its still the same.... Invalid Block Address.....

I've Used Other DVD-R Like Liteon 4x, Sony 4x Still seem to be the same
What's the problem? My burner? DVD-R Disk? USB Port? Or NERO?