|
||
|
New Member
加入日期: Mar 2003
文章: 7
|
Help! Lower temp & OC
This is what i am using
P4 2.4Ghz 800 FSB (running at 3.0Ghz) Zaleman CNPS7000-AlCu Abit IS7 Bios 13 (Street Racer mode) Corsair XMS TwinX PC3200LL 512 MB(2*256) MSI Ti4600 Aspire X-Sonic Aluminum case 350Watts Current state: CPU: 48C-Idle, 60-Load System: 35C Bios setting: CPU core voltage: 1.6v Ram voltage: 2.8v 250 FSB CPU/Ram ratio: 5:4 CAS:2 RAS:2 CAS to RAS:3 Cycle:6 After i read some articles from this forum and found out people have their cpu oc from 2.4 to 3.2 with temp always under 35C. Can someone tell me how you can do that?? What do i need to change in Bios to get more Mhz? And how can I lower my CPU temp??? |
|||||||
2003-06-27, 06:06 PM
#1
|
|
|
Power Member
 
= PCDVD認證賣家 =
加入日期: May 2002 您的住址: 不環海的地方
文章: 503
|
都是英文..我看無..呼叫狂少翻譯一下好嗎..
 我只知道好像幾度問題.. 我的2.4GHT800設12*250=3.0G不加壓(1.475~1.5之間跑) 版子青雲PX865PE-PRO.原廠風扇.石墨 BIOS溫度50~65度上下.BMB5的溫度是40~46度之間我也不知道哪一個準. 要溫度低於39以下可能必須 1.不加壓 2.良好風扇及散熱膏 3.水冷套件 大大您參考參考  |
||
|
2003-06-27, 06:46 PM
#2
|
|
|
Master Member
  加入日期: Mar 2001 您的住址: Chiayi
文章: 1,535
|
1.CPU及北橋換上水冷裝置
2.南橋換上AHPHA散熱器 很閒的話連主機板上的功率晶體也貼上散熱器 3.保證機殼內良好的通風環境 4.若有冷氣機請開至最低溫 |
|
2003-06-27, 06:58 PM
#3
|
|
|
Power Member
加入日期: Oct 2000 您的住址: Kaohsiung,Taiwan
文章: 603
|
My system is almost the same as yours, listed below are my compoment.
CPU: 2.4 CG OC 3.0 MB: Asus P4P800 (Bios 1007) RAM: A-DATA (2-2-3-5) System FAN: 3X Panaflo Temperature CPU: 45 (Idle) 49~53 (Load) System: 42~47 I also wonder how to get CPU termperature below 35C with 2.4C OC 3.2? |
|
2003-06-27, 07:03 PM
#4
|
|
|
New Member
加入日期: Mar 2003
文章: 7
|
What i really want to know is how can i improve the air flaw inside the case?? And what fan is bset for P4 2.4c??? Cause my friend's Athlon XP 2500+ oc to 3200+ with stock fan has cpu temp of only 36C-Idle and 44C-Load. my Ram Timing is now(2-3-2-5) and if i get to 2-2-2-5 i can't load into WinXP. the default cpu voltage is 1.5, and i incrase it to 1.6. Is it necessary to do that??
|
|
2003-06-27, 07:17 PM
#5
|
|
我的名子上太空.翱翔宇宙天地間 
