求救!!XP無法燒錄!!
 

我安裝xp之後無法燒錄cd
easy cd creator 5.02b升級到5.1XP後及clone cd,nero 最新版都不行
測試CD-RW及DVD都被限制在8倍速以下,每次燒到一半就燒�***
我在WIN2000卻用得好好的
是不是跟我的scsi卡有關呢??全部硬體的韌體都是最新的
有沒有人遇過此問題,幫幫我!!

配備如下
Adaptec 29160 SCSI Card
Fujitsu MAN3184MP 18GB SCSI HD
Yamaha 2100s SCSI 16x CD-RW
Pioneer 305S SCSI 10x DVD-ROM
:confused:

Easy CD Creator 與 Windows XP 可能會有不相容的情形...

到這看看有沒有妳要的解答....
http://www.roxio.com/en/support/index.jhtml

補充一下:
要注意
1. Easy CD Creator 的版本....
Easy CD Creator Platinum 或 Easy CD Creator Basic

2. Windows XP 是否由Windows 2000 或 Windows 98/ME...升級安裝的...
Roxio 網站上列有三種不同的解決方案...
(1) Windows XP 由 Windows 2000 升級安裝的..
(2) Windows XP 由 Windows 98/ME...升級安裝的..
(3) 直接安裝 Windows XP ..

請詳細看看 Roxio 網站上的說明...

謝謝回覆
我有去下載我要的版本,就是都沒問題才會覺得奇怪
而且連clone cd nero都不行完整燒錄
所以我才會懷疑是不是29160有問題或是硬碟的關係

我也有和你類似的情形,我的光碟機讀取也是被限制在8X, 我用 Nero CD Speed 測的結果只到10X, 害我都不能對拷, 我的配備如下:

Aha 29160
Seagate Ultra 160 18G 10000rpm
Plextor 40x SCSI CD-ROM (1.13)
Plextor 121032 CD-RW (1.04)
Teac 32X SCSI CD-ROM

Windows XP professional 中文版
而且我的週邊的韌體都已經更新了...

I have the Easy CD Creator Platinum 5.02. But I cannot open it under
XP Pro, the error message is "cannot initialize engine".
What is wrong with Easy CD Creator Platinum 5.02 ?
Who can answer this question ? I'm very appreciate your help...:)

I installed Easy CD Creator 5.0 "Platinum" on Windows XP Professional successfully....

I did it by the way that is ( http://www.roxio.com/en/support/ecdc/xpup.jhtml )

Installation instructions for users installing Easy CD Creator 5 Platinum in Windows XP:
1. In Windows XP, (We recommend a custom install where you remove Take Two from the installation to avoid possible problems) install Easy CD Creator 5.0x Platinum.
( I remove Take Two & Direct CD )
2. Restart after installation is complete.
( After restart I disable Project Selector from system tray)
3. Download xp_up_platinum.exe (1.9MB) and install it.
4. Restart after installation is complete.
5. It is recommended that you update your Easy CD Creator Platinum to 5.02c (ecdc_v502c_up.exe - 5.6MB)
6. Restart after installation is complete.
7. Run xp_up_platinum.exe (1.9MB) a second time.

Easy CD Creator has been updated to function properly on Windows XP.
Note: Take Two will be disabled by this update due to incompatibility with Windows XP.

Finally I run "Easy CD Creator", it's work...

一樣有問題
 

謝謝指導
你所說的過程我都有做EZCD 執行都沒問題
但每次一燒到一半就壞掉 ,速度也有問題
WIN XP安裝完後我直接安裝CLONECD最新版 之後就什麼都沒裝
但連CLONECD燒到一半也都會�***
所以我懷疑是XP對SCSI的週邊或SCSI CARD 驅動程式有問題
要不然只安裝CLONECD, 怎會燒�***,就連NERO 也一樣
請各位前輩指導, 因為我想不只我一個人遇到這個問題,謝謝