PCDVD數位科技討論區

PCDVD數位科技討論區 (https://www.pcdvd.com.tw/index.php)
-   儲存媒體討論區 (https://www.pcdvd.com.tw/forumdisplay.php?f=20)
-   -   Benq 1640 燒錄三菱 +R DL 出事了 Orz.... (https://www.pcdvd.com.tw/showthread.php?t=493029)

alpha98 2005-05-28 12:03 AM

Benq 1640 燒錄三菱 +R DL 出事了 Orz....
 
使用軟體: DVD Decrypter V3.5.4.0

測試硬體:
DVD-ROM : Toshiba SD-M1712
DVD PLYAER : Pioneer 533K

DVD Decrypter 所顯示的訊息
---------------------------------------------------------------
BENQ DVD DD DW1640 BSGB (ATA)
Current Profile: DVD+R DL

Disc Information:
Status: Complete
Erasable: No
Sessions: 1
Sectors: 2,780,448
Size: 5,694,357,504 bytes
Time: 617:54:48 (MM:SS:FF)

DVD+R DL Boundary Information:
L0 Data Zone Capacity: 1,954,864
Changeable: No

Physical Format Information (ADIP):
Disc ID: MKM-001-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519

Physical Format Information (Last Recorded):
Disc ID: MKM-001-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 15,451,327
Last Physical Sector in Layer 0: 2,151,471

Layer Information:
Layer 0 Sectors: 1,954,864 (70.31%)
Layer 1 Sectors: 825,584 (29.69%)
-------------------------------------------------------------------

DVD-ROM / DVD PLAYER 完全都讀不到, Benq 倒是正常讀取

但小弟早期曾借朋友的 Pioneer A08 ,同樣是燒 三菱 +R DL 片
DVD-ROM / DVD PLAYER 卻都完全沒問題,讀取正常
以下是此片在 BENQ 機子裡 DVD Decrypter 所顯示的訊息
--------------------------------------------------------------------
BENQ DVD DD DW1640 BSGB (ATA)
Current Profile: DVD+R DL

Disc Information:
Status: Complete
Erasable: No
Sessions: 1
Sectors: 4,060,128
Size: 8,315,142,144 bytes
Time: 902:17:03 (MM:SS:FF)

DVD+R DL Boundary Information:
L0 Data Zone Capacity: 2,031,840
Changeable: No

Physical Format Information (ADIP):
Disc ID: MKM-001-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519

Physical Format Information (Last Recorded):
Disc ID: MKM-001-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,577,055
Last Physical Sector in Layer 0: 2,228,447

Layer Information:
Layer 0 Sectors: 2,031,840 (50.04%)
Layer 1 Sectors: 2,028,288 (49.96%)
--------------------------------------------------------

小弟手上還有 Pioneer DVR-A09XLB ,同樣的 DVDISO 還沒決定是否再燒一次
來確認 Benq 1640 是否有問題,還請有經驗的網友分享一下吧


目前白白浪費了一張 +R DL 片了

alpha98 2005-05-28 07:40 AM

自已頂一下

有人用 DVR-A09 燒 三菱 +R DL 測試正常嗎?

不然做了白老鼠給各位經驗卻得不到各位的回應,心情真是 DOWN到底了

Anntony 2005-05-28 09:09 AM

引用:
作者alpha98
自已頂一下

有人用 DVR-A09 燒 三菱 +R DL 測試正常嗎?

不然做了白老鼠給各位經驗卻得不到各位的回應,心情真是 DOWN到底了


把你的燒錄環境跟狀況寫信去給 BenQ 客服吧,
看起來是燒出來的片子其他家讀不到, 而不是 1640 燒錄的問題,
DVD Decrypter 跟 1640 的相容性說不定是個關鍵.

以上建議給您參考.

alpha98 2005-05-28 12:37 PM

引用:
作者Anntony
把你的燒錄環境跟狀況寫信去給 BenQ 客服吧,
看起來是燒出來的片子其他家讀不到, 而不是 1640 燒錄的問題,
DVD Decrypter 跟 1640 的相容性說不定是個關鍵.

以上建議給您參考.


小弟的朋友用 DVR-A08 搭配 DVD Decrypter V3.5.4.0 燒三菱 +R DL 好幾片都是正常
的,同樣的軟體,版本一樣,不同的機器,燒出來結果不同

當初小弟借朋友的 A08 來燒時,三台機器都正常讀取,那時讓小弟確認了小弟的 DVD-ROM
及 DVD PLYAER 的確是可以讀取三菱 +R DL 片的,此次燒錄卻只有 BENQ 1640 自已讀
的到,用 PowerDVD 播放影片也都正常,但拿到 DVD-ROM 、DVD PLYAER 不是吐片就
是狂讀不到,小弟目前還在考慮,是否同樣的 DVDISO 檔用 A09 燒片出來,來証明 BENQ
1640 燒三菱 +R DL 有問題的,畢竟 +R DL 實在有夠貴的 >_<

Xion 2005-06-02 06:36 PM

一定要用DVD Decrypter來燒DVDISO嗎?
建議改用Benq隨機附贈的軟體來燒ISO看看....

lgs0809 2005-06-11 07:52 AM

就我個人的經驗,
使用錸德、三菱這兩個廠牌,
在我的A09都OK沒有問題。

noroma 2005-06-11 05:05 PM

我燒錸德最近出廠的 +R DL 是正常的 .

mjl 2005-06-11 09:21 PM

不知樓主你是用幾倍去燒三菱 +R DL的...

alpha98 2005-06-11 09:51 PM

其實答案大概是出來了,因為小弟用韌體是 BSGB 版而沒更新
而不關程式的事......

只是更新後,小弟常用的 ricoh 4x 就不能 oc 8x 了,所以就沒更新
目前就用 A09 燒,測試一切正常


另小弟也在 A09 上測 2.4X 4X 來燒錄,讀取一切都正常
目前剛燒滿10片 DL 了 ^^;

Eatman 2005-06-14 11:42 AM

引用:
作者alpha98
其實答案大概是出來了,因為小弟用韌體是 BSGB 版而沒更新
而不關程式的事......

只是更新後,小弟常用的 ricoh 4x 就不能 oc 8x 了,所以就沒更新
目前就用 A09 燒,測試一切正常


另小弟也在 A09 上測 2.4X 4X 來燒錄,讀取一切都正常
目前剛燒滿10片 DL 了 ^^;


小弟用PX-716A 燒了三菱DL+R數片都是6X也都正常
但INFOMEDIA 遠翰科技2.4x DL+R的則不管2.4x / 4x
燒畢後欲讀取都慘敗於分層點...


所有的時間均為GMT +8。 現在的時間是08:24 AM.

vBulletin Version 3.0.1
powered_by_vbulletin 2025。