PCDVD數位科技討論區

PCDVD數位科技討論區 (https://www.pcdvd.com.tw/index.php)
-   儲存媒體討論區 (https://www.pcdvd.com.tw/forumdisplay.php?f=20)
-   -   測試軟體 (https://www.pcdvd.com.tw/showthread.php?t=113531)

傲笑紅塵 2002-06-29 06:01 AM

使用方式

main->disc measurement->ater measure(wrt)->write speed->run test
如為已燒錄碟片就不用測這項,Write Speed 設為燒錄機最快倍速
C1/C2 Measurement->End Min->80(視碟片而定)->Run Test

請把右上角的Mode改為DMA 2,在Utility->Set PCI Mode
建議用這套軟體燒錄,至於尾段會飄高也就表示這碟片不是很好,80碟片後段較難控制,製程如沒有做好就會有此問題

mig33 2002-06-29 06:36 AM

引用:
Originally posted by KJ200X

ㄝ來旺較會震動 老實說沒什麼深刻印象讓我感覺如此
我用過朋友的LTR 32123S 沒什麼太大感覺
不過因為他把機子拿回去一陣子之後
我才購入TEAC W540E
所以沒有同時比較過
也沒特別去注意

不過改天我可能會去搶他那台回來當測試機:D

我又試了一下
還好只是少數一些片子會震
大部分的片子都不會震......
"第一次"手氣較不好
正好拿到會讓它震動的片子
(TEAC倒是從不曾給我震過,所以我剛剛有點大驚小怪)

剛試燒了一片,結果OK
看來這台應沒啥問題
總算安心多了.....

現在40125S到底有沒有改成大陸製啊?
還是說我手氣較好,給拿到MIT的

idiot 2002-06-29 07:12 AM

引用:
Originally posted by mig33

我又試了一下
還好只是少數一些片子會震
大部分的片子都不會震......
"第一次"手氣較不好
正好拿到會讓它震動的片子
(TEAC倒是從不曾給我震過,所以我剛剛有點大驚小怪)

剛試燒了一片,結果OK
看來這台應沒啥問題
總算安心多了.....

現在40125S到底有沒有改成大陸製啊?
還是說我手氣較好,給拿到MIT的


>> 剛試燒了一片,結果OK
>> 看來這台應沒啥問題
>> 總算安心多了.....

so....... any results on the write quality for us???

idiot 2002-06-29 11:09 PM

Here are some limited test results with an Asus drive and limited numerical precision and by force the drive to read with 10000rpm. (sorry but the computer i am using now have no chinese input methods)

That's 5 Color (blue) (16X generation TY) (80min) C1 average ~0

Ricoh 1-12X by Ritek (74min) C1 ~ 1

Mitsui 80min (the new print version) C1 ~1 (but seems to be better than Ricoh with more 0s)

(the above are burned with a Plextor 121032A)

A Green print Ritek with S dye (but this disc is shorter, with only 64min worth of data) C1 ~ 1

A CMC made Yamaha KHS 20X silver have C1~9

A Grace 2002 Ritek Kdye c1 ~ 294

(above by liteon 32123s at max write speed for each media)

Prodisc smartbuy 4-12x cdrw c1~ 125 (sample 1) c1~18 (sample 2)

:confused:

Liteon made by Plasmon 4-10x cdrw c1~ 16

Infodisc made 2nd print 1~4X CDRW c1~14

TDK made by mitsubishi in Sg. cdrw c1~ 29

5-Star made by Prodisc with Mitsui dye c1~ 5

Ritek made JS dye c1 ~ 1

(these are burned with the Asus 3212A of mine, HS CDRWs at 12X, low speed CDRW at 4X and CDRs at 12X)


As a side note: lower the read speed will give a lower c1 count in my case.

takuro 2002-06-30 01:19 AM

Ritek JS染的品質不一


尾段飆高的例子

idiot 2002-06-30 02:27 AM

引用:
Originally posted by takuro
Ritek JS染的品質不一


尾段飆高的例子


:eek: :eek: :eek: :eek: :eek:

WoW!

Did you hacked/cracked um doctor pro???

KJ200X 2002-06-30 02:29 AM

引用:
Originally posted by idiot


:eek: :eek: :eek: :eek: :eek:

WoW!

Did you hacked/cracked um doctor pro???


對阿!!!
T老師破解了嗎
:eek: :eek: :eek:

還是是以前測的

schumilee 2002-06-30 02:42 AM

卡個位置,

破解的話偶也要知道唷,

拜託啦 .....

idiot 2002-06-30 02:43 AM

引用:
Originally posted by takuro
尾段飆高的例子


5star makes a much better example here.

BTW so now you do not have to buy a liteon :p

mig33 2002-06-30 03:49 AM

引用:
Originally posted by KJ200X

對阿!!!
T老師破解了嗎
:eek: :eek: :eek:
還是是以前測的

答案就在圖上
仔細看其中兩張圖有Idiot-......

另外要是T老師已經破解了就不用再買Liteon了
不過這個DOS下的程式真的有點麻煩

昨天興沖沖的敗了一台Liteon回來
我一開機就直接進純DOS模式
那隻程式還告訴我記憶體不足
我只好把很久以前曾用過的DOS設定
再花了一堆時間複習一遍
還去抓了FreeDOS回來
東調西調才把記憶體容量(640K的部分)搞定

不過這現象要看電腦
有的電腦直接進純DOS都還可以剩550K以上
就沒這個問題了.....


所有的時間均為GMT +8。 現在的時間是07:07 PM.

vBulletin Version 3.0.1
powered_by_vbulletin 2025。