我隨便用一款..
像是smartctl...
scan皆是如此...
簡單的命令:
C:\>smartctl --scan-open
/dev/sda -d ata [ATA] (opened)

C:\>smartctl -a /dev/sda
smartctl 5.40 2010-10-16 r3189 [i686-w64-mingw32-win7(64)] (sf-win32-5.40-1)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.12 family
Device Model: ST31000528AS
Serial Number: 9VP9GLM4
Firmware Version: CC38
User Capacity: 1,000,204,886,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Sun Jan 02 09:41:59 2011 TST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed

without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 609) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off supp
ort.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 182) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_
FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 111 100 006 Pre-fail Always -
31032389
3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always -
0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always -
10
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always -
0
7 Seek_Error_Rate 0x000f 100 253 030 Pre-fail Always -
20209
9 Power_On_Hours 0x0032 100 100 000 Old_age Always -
12
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always -
0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always -
5
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always -
0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always -
0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always -
0
188 Command_Timeout 0x0032 100 100 000 Old_age Always -
0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always -
0
190 Airflow_Temperature_Cel 0x0022 062 053 045 Old_age Always -
38 (Min/Max 20/39)
194 Temperature_Celsius 0x0022 038 047 000 Old_age Always -
38 (0 19 0 0)
195 Hardware_ECC_Recovered 0x001a 036 035 000 Old_age Always -
31032389
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always -
0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline -
0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always -
0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline -
59777354825750
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline -
3300788
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline -
631658510

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

(有人注意到SCTERC部分的話, 那是我硬開的..:laugh:...)
這些人都是在相關的data recovery背景下工作...
我不認為它們會有甚麼問題..

我反而還要問Seagate是怎麼解讀這些情況...
我猜它們根本打死都不會講...

..............................................................
 

我覺得可能是
seagate存放smart seek error rate數值的欄位設計
和別家的硬碟可能有點不同
所以程式自晶片擷取出的數值自然不是真的數值,所以變成沒有參考性?

可奇怪的是
hd turn pro會顯示數值暴增
但是健康狀態卻是ok的
這也讓我感覺smart到底有無參考性
感覺怪怪的 :shock:

小弟選擇相信原廠的說法
真的有問題的話
銷量最大的硬碟大廠
應該早就一堆人爆料出來討論了
況且我看99.99999%有注意到該項數值異常的人
使用上都是ok的
而且我發現hd turn有些S.M.A.R.T欄位還會顯示出負幾萬到幾十萬的值出來
感覺軟體是不是也怪怪的?

還是相信原廠
用起來也比較安心
:ase

若真如上所述
那原廠要說清楚講明白
不就要跟大家講存放數值的晶片,裡面程式碼是如何編寫的
猜可能會是大工程

請問 V大

這幾顆都是哪出產的阿??

泰國..
目前不知道要不要把它當成正常來看待...

因為增長數實在太高...

這種通常不可公開..
它們不會講的..

死機牌12代 韌體 不是早就改成CC46
還在CC38 :stupefy: 庫存貨嗎 :laugh:

S的覺得有問題可以刷韌體看看
若使用上沒啥問題我覺得倒還OK
之前買的LP突然店打不起來也是自己韌體過一過就好了
RMA的話還要買新硬碟來放資料划不來

Seek Error Rate爆漲好像只有死雞會這樣

剛剛看了一下我的硬碟的SMART資訊，我的系統碟的日立2TB(01)的值竟然高達000000010001，這是表示我該趕快備份資料了嗎？

這顆去年1月14日才買的，再過幾天就過一年了啊!!可是我暫時沒錢買新硬碟備份這顆硬碟上面的資料啊....