站上的前輩果真都是惡魔阿:cool: :cool: :cool:
順便問一下medical的片子難道是「醫藥」用途？？
醫藥用CD-R做啥？有何特別要求？？超好奇

就是品質管制以及製程控制比較嚴格啦
有些還標榜相容性特高

Re: 請前輩給點意見吧 測量C1C2
 

Both Mitsui you have are worth measuring

新版that's

And now the important part.......

Can you test say the Mitsui or Ricoh or 新版that's
at different write speeds?

say 8x vs 16x vs 32x vs 40 or 48x????

because the first 5min do not exceed 24X on any of the current burners we need full length tests to see if high speed recording is really detrimental to the write quality.

thanks....

Takuro, WhiteFang: help translate or design other experiments if you like.

and yeah, the Sony by TY is also worth measuring......

Re: Re: 請前輩給點意見吧 測量C1C2
 

這樣如果測一種片子就要花5次測試
而cyanine和phthalocyanine所需的燒錄功率又不同
所以至少要測that's+(Ricoh or mitsui)
降子10次就用完了...:(

Re: Re: Re: 請前輩給點意見吧 測量C1C2
 

Start with just 8x vs 40x would be enough, the intermediate intervals needs to be tested only if there is a huge difference.

Also another thing of interest

Liteon vs Asus vs Teac vs Plextor....

but this is of low piority since cdrinfo already does it for "review" units.

小弟也想過要用不同的燒錄速度來比較其間差異！
但是因為以下理由使小弟要更謹慎的考慮
1. 小弟的BP4只有到16倍，所以無法測得更高倍速的數據
2. 如果每片都測好幾種速度燒錄的話，那10次頂多讓我試過2種而已，不是很經濟

1: ask a friend might be good

2: 2 speed for each: that's and Mitsui would be fine

besides you probabily will do a test for each anyways

here! 1及2是用ricoh 5120 2x燒的1

1. MAXELL MUSIC CD-R



2.Ricoh 8x CD-R



3.柯達金+銀, 用bp4 2x燒的

:eek:

>> 3.柯達金+銀

not bad at all :)

Here http://pc.xline.com.tw/showroom/view.php?C=2116&UNAME=