|
||
|
Major Member
 
加入日期: Jan 2001
文章: 116
|
求救!!XP無法燒錄!!
我安裝xp之後無法燒錄cd
easy cd creator 5.02b升級到5.1XP後及clone cd,nero 最新版都不行 測試CD-RW及DVD都被限制在8倍速以下,每次燒到一半就燒�*** 我在WIN2000卻用得好好的 是不是跟我的scsi卡有關呢??全部硬體的韌體都是最新的 有沒有人遇過此問題,幫幫我!! 配備如下 Adaptec 29160 SCSI Card Fujitsu MAN3184MP 18GB SCSI HD Yamaha 2100s SCSI 16x CD-RW Pioneer 305S SCSI 10x DVD-ROM  |
|||||||
2001-12-16, 03:31 AM
#1
|
|
|
Major Member
加入日期: Jun 2001 您的住址: R.O.C (Taiwan)
文章: 141
|
Easy CD Creator 與 Windows XP 可能會有不相容的情形...
到這看看有沒有妳要的解答.... http://www.roxio.com/en/support/index.jhtml
__________________
From: Assassin_C (2002) |
||
|
2001-12-16, 11:19 AM
#2
|
|
|
Major Member
加入日期: Jun 2001 您的住址: R.O.C (Taiwan)
文章: 141
|
引用:
補充一下: 要注意 1. Easy CD Creator 的版本.... Easy CD Creator Platinum 或 Easy CD Creator Basic 2. Windows XP 是否由Windows 2000 或 Windows 98/ME...升級安裝的... Roxio 網站上列有三種不同的解決方案... (1) Windows XP 由 Windows 2000 升級安裝的.. (2) Windows XP 由 Windows 98/ME...升級安裝的.. (3) 直接安裝 Windows XP .. 請詳細看看 Roxio 網站上的說明...
__________________
From: Assassin_C (2002) |
|
|
2001-12-16, 11:35 AM
#3
|
|
|
Major Member
加入日期: Jan 2001
文章: 116
|
謝謝回覆
我有去下載我要的版本,就是都沒問題才會覺得奇怪 而且連clone cd nero都不行完整燒錄 所以我才會懷疑是不是29160有問題或是硬碟的關係 |
|
2001-12-17, 12:29 AM
#4
|
|
|
New Member
加入日期: Nov 2001 您的住址: 台中
文章: 8
|
我也有和你類似的情形,我的光碟機讀取也是被限制在8X, 我用 Nero CD Speed 測的結果只到10X, 害我都不能對拷, 我的配備如下:
Aha 29160 Seagate Ultra 160 18G 10000rpm Plextor 40x SCSI CD-ROM (1.13) Plextor 121032 CD-RW (1.04) Teac 32X SCSI CD-ROM Windows XP professional 中文版 而且我的週邊的韌體都已經更新了... |
|
2001-12-19, 10:26 PM
#5
|
|
|
Senior Member
加入日期: Feb 2000 您的住址: 台中
文章: 1,196
|
引用:
I have the Easy CD Creator Platinum 5.02. But I cannot open it under XP Pro, the error message is "cannot initialize engine". What is wrong with Easy CD Creator Platinum 5.02 ? Who can answer this question ? I'm very appreciate your help...  |
|
|
2001-12-20, 08:16 AM
#6
|
|
|
Major Member
加入日期: Jun 2001 您的住址: R.O.C (Taiwan)
文章: 141
|
引用:
I installed Easy CD Creator 5.0 "Platinum" on Windows XP Professional successfully.... I did it by the way that is ( http://www.roxio.com/en/support/ecdc/xpup.jhtml ) Installation instructions for users installing Easy CD Creator 5 Platinum in Windows XP: 1. In Windows XP, (We recommend a custom install where you remove Take Two from the installation to avoid possible problems) install Easy CD Creator 5.0x Platinum. ( I remove Take Two & Direct CD ) 2. Restart after installation is complete. ( After restart I disable Project Selector from system tray) 3. Download xp_up_platinum.exe (1.9MB) and install it. 4. Restart after installation is complete. 5. It is recommended that you update your Easy CD Creator Platinum to 5.02c (ecdc_v502c_up.exe - 5.6MB) 6. Restart after installation is complete. 7. Run xp_up_platinum.exe (1.9MB) a second time. Easy CD Creator has been updated to function properly on Windows XP. Note: Take Two will be disabled by this update due to incompatibility with Windows XP. Finally I run "Easy CD Creator", it's work...
__________________
From: Assassin_C (2002) |
|
|
2001-12-20, 03:41 PM
#7
|
|
|
Major Member
加入日期: Jan 2001
文章: 116
|
一樣有問題
謝謝指導
你所說的過程我都有做EZCD 執行都沒問題 但每次一燒到一半就壞掉 ,速度也有問題 WIN XP安裝完後我直接安裝CLONECD最新版 之後就什麼都沒裝 但連CLONECD燒到一半也都會�*** 所以我懷疑是XP對SCSI的週邊或SCSI CARD 驅動程式有問題 要不然只安裝CLONECD, 怎會燒�***,就連NERO 也一樣 請各位前輩指導, 因為我想不只我一個人遇到這個問題,謝謝 |
|
2001-12-22, 05:59 AM
#8
|
|
