YAMAHA KHS 700mb的片子很濫嗎!?最近用這白金片燒片,應該說是沒有一次成功...真頭痛.我把錯誤的log貼上來,希望有前輩可以幫我解讀一下.thanks!
LOG
Windows XP 5.1
WinAspi: -
ahead WinASPI: File 'C:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.44, size=172099 bytes, created 2002/6/23 下午 04:06:18
Nero Version: 5.5.8.2
Recorder: <PLEXTOR CD-R PX-W8220T> Version: 1.05 - HA 2 TA 3 - 5.5.8.2
Adapter driver: <dmx3194> HA 2
Drive buffer : 4096kB
Bus Type : default (0) -> SCSI
CD-ROM: <PIONEER DVD-ROM DVD-115F>Version: 1.27 - HA 1 TA 0 - 5.5.8.2
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : IBM-DTTA-351010 atapi Port 0 ID 0 DMA: On
DiskPeripheral : IBM-DAQA-32160 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-115F atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : PLEXTOR CD-R PX-W8220T1.05 dmx3194 Port 2 ID 3 DMA: ?
CdRomPeripheral : PLEXTOR CD-ROM PX-40TS 1.13 dmx3194 Port 2 ID 4 DMA: ?
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 34603008 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261672kB)
Free physical memory: 104MB (106760kB)
Memory in use : 59 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Wizard: Off

CD-ROM (ISO)
24.6.2002

上午 11:49:03 #1 Text 0 File Isodoc.cpp, Line 5383
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 2 / XA
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : Multibyte
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

上午 11:49:03 #2 Text 0 File Reader.cpp, Line 118
Reader running

上午 11:49:03 #3 Text 0 File Burncd.cpp, Line 2778
Turn on Track-At-Once, using CD-R/RW media

上午 11:49:03 #4 Text 0 File Writer.cpp, Line 129
Writer PLEXTOR CD-R PX-W8220T running

上午 11:49:03 #5 ISO9660GEN -11 File geniso.cpp, Line 4428
First writeable address = 0 (0x00000000)

上午 11:49:03 #6 Text 0 File ThreadedTransferInterface.cpp, Line 684
Setup items (original item values)
0: TRM_DATA_MODE2_FORM1_NOSUB (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 345086 (345086) = #345086/76:41.11
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

上午 11:49:05 #7 Text 0 File DlgWaitCD.cpp, Line 199
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 345085 (76:43.10)

上午 11:49:07 #8 Text 0 File DlgWaitCD.cpp, Line 1394
Recorder: PLEXTOR CD-R PX-W8220T;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data: ?

上午 11:49:13 #9 Text 0 File ThreadedTransferInterface.cpp, Line 834
Prepare recorder PLEXTOR CD-R PX-W8220T for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x20 Close Session
Tracks 1 to 1:
TRM_DATA_MODE2_FORM1_NOSUB, 2048/0x0, ISRC "", FilePos 0 307200 707043328

上午 11:49:13 #10 Text 0 File ThreadedTransferInterface.cpp, Line 862
Removed 2 run-out blocks from end of track 1.

上午 11:49:13 #11 Text 0 File ThreadedTransferInterface.cpp, Line 684
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_FORM1_NOSUB (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 345086 (345086) = #345086/76:41.11
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE2_FORM1_NOSUB, 2048, config 0, wanted index0 0 blocks, length 345084 blocks [PLEXTOR CD-R PX-W8220T]

上午 11:49:13 #12 Phase 24 File dlgbrnst.cpp, Line 1550
Caching of files started

上午 11:49:13 #13 Phase 25 File dlgbrnst.cpp, Line 1550
Caching of files completed

上午 11:49:13 #14 Phase 36 File dlgbrnst.cpp, Line 1550
Burn process started at 8x (1,200 KB/s)

上午 11:49:14 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1961
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0