PCDVD數位科技討論區 - 瀏覽單個文章

引用:

Originally posted by mig33

Ritek會掉尾速
所以Ritek的圖形很可能是像這樣

http://www.cdrinfo.com/Sections/Art...i/c1c2_high.gif

TDK再怎麼差，至少不像Ritek會掉尾速
另外Ritek有小破洞竟沒被品管打掉
要說Ritek的品管比TDK好(雖然TDK也是錸德代工)
我是不相信的

The TDKs Takuro got 很差但Ritek很可能更爛
真是臺灣人的悲哀.......

引用:

Originally posted by mig33

又takuro兄測的只是前五分鐘
若這片被Liteon代工的TDK燒過的Mitsui片子拿給takuro兄測
將會高達500以上，而不是像TDK(前五分鐘)的23.0

另外C1的多寡，燒錄機也要負部分責任的
同樣Mitsui的片子被其它燒錄機燒，就無此現象
http://www.cdrinfo.com/Sections/Art...eries=0&index=2
看看Liteon 40125S，也是前幾分鐘有出現很高的C1
http://www.cdrinfo.com/Sections/Art...x-40x-74min.gif
另一片被Liteon 40125S燒的片子
http://www.cdrinfo.com/Sections/Art...x-32x-74min.gif
As it seems with 74min CDs, LiteOn LTR-40125S has some problems to keep the writing quality high in the first 10 minutes.

That's a given, especially when the firmware can't recognize a dye formulation. TY's 40X disk suffers from this problem in many cases.