CPU Fast Command Decode : Ultra
DRAM Clock : as Host CLK (133MHz)
DRAM CAS Latency : 2
Bank Interleave : 4 Bank
Precharge to Active(Trp) : 2T
Active to Precharge(Tras) : 5T
Active to CMD(Trcd) : 2T
DRAM Command Rate : 1T Command
AGP Aperture Size : > = 128M
AGP Mode : 4X
AGP Fast Write : Enabled
USB Controller : All Disabled (如果你不會用到USB device的話)
其餘COM,Printer Port等, 沒用到的都disabled
剩下的採預設值即可

PS:
我是用 Crucial PC2100 256MB Registered x 4
DQS Input/Output Delay皆為Auto
Command Drive Strength為Lo
DCLK Feedback Delay為0 ps
若你的RAM跑不了, 可針對這些不同的選項來作微調