怎麼可能燒掉,明明寫著支援2x,4x,8x agp!
p2b可跑2x,如果燒了我還可以跟他換新的.而且控制台還有agp 2x可以選.

這些是題外話...以下是我用dx9跑出來的結果,我一直很疑惑為什麼agp加速不能用!?


---------------
Display Devices
---------------
Card name: RADEON 9500 SERIES
Manufacturer: ATI Technologies Inc.
Chip type: Radeon 9500AGP (AD)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_4144&SUBSYS_40161458&REV_00
Display Memory: 64.0 MB
Current Mode: 800 x 600 (32 bit) (60Hz)
Monitor: Monitor Max Res:
Driver Name: ati2dvag.dll
Driver Version: 6.14.0001.6292 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 1/20/2003 22:45:02, 268416 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: Mini VDD: ati2mtag.sys
Mini VDD Date: 1/20/2003 22:44:36, 569984 bytes
Device Identifier: {D7B71EE2-0204-11CF-7C6F-1760A1C2CB35}
Vendor ID: 0x1002
Device ID: 0x4144
SubSys ID: 0x40161458
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel:
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Not Available
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
---EOF---
而且跑d3d測試只能跑dx7,再上去的sdx8,dx9都會當機.(畫面凍住,可是還會聽到錯誤的"咚"聲.

我只是想確定我的卡沒問題要帶去宿舍用(離家很遠),並不是要再p2b上跑..
因為會當機所以搞不清楚這樣到底是好的還是壞的.
基本上不跑3d就沒有事...
請各位大大幫我看看!謝謝!