|
Master Member
|
引用:
Originally posted by mokog123
請看你硬碟上圖示,不然來這裡看到下方http://www.maxtor.com/en/support/
在最右邊選擇你硬碟型號,之後詳細資料
(Master)
The vertical jumper over the J50 pins is configuring the drive as a Master.
(Master with CLJ)
The vertical jumper over the J50 pins is configuring the drive as a Master.
The vertical jumper over the J46 pins is in the Cylinder Limitation position (CLJ).
(Slave)
No jumper is required to configure the drive as a Slave.
The jumper over the J44 and J42 positions is in the jumper storage position.
(Slave with CLJ)
The jumper over the J44 and J42 positions is in the jumper storage position.
The jumper over the J46 pins is in the Cylinder Limitation position (CLJ).
(Cable Select)
The jumper over the J48 position is configuring the drive for Cable Select.
(Cable Select with CLJ)
The jumper over the J48 position is configuring the drive for Cable Select.
The jumper over the J46 pins is in the Cylinder Limitation position (CLJ).
|
這位大大,謝謝你囉~  |