引用:
Originally posted by 阿帆
對了,我把新買的硬碟設在MASTER,舊的硬碟要設在SL...(忘了!)
不過舊的硬碟上竟然沒說JUMPER要怎麼設!!挖勒~
請問有人知道MAXTOR 20G 5400RPM(32049H2)的JUMPER要怎麼設嗎?
他的JUMPER是我原本是插在左邊數來第2排的針腳上,後來把他改到左邊數來第3排的針腳上,就可以用了,不知道我設的位置是什麼??
|
請看你硬碟上圖示,不然來這裡看到下方
http://www.maxtor.com/en/support/
在最右邊選擇你硬碟型號,之後詳細資料
(Master)
The vertical jumper over the J50 pins is configuring the drive as a Master.
(Master with CLJ)
The vertical jumper over the J50 pins is configuring the drive as a Master.
The vertical jumper over the J46 pins is in the Cylinder Limitation position (CLJ).
(Slave)
No jumper is required to configure the drive as a Slave.
The jumper over the J44 and J42 positions is in the jumper storage position.
(Slave with CLJ)
The jumper over the J44 and J42 positions is in the jumper storage position.
The jumper over the J46 pins is in the Cylinder Limitation position (CLJ).
(Cable Select)
The jumper over the J48 position is configuring the drive for Cable Select.
(Cable Select with CLJ)
The jumper over the J48 position is configuring the drive for Cable Select.
The jumper over the J46 pins is in the Cylinder Limitation position (CLJ).