PCDVD數位科技討論區 - 瀏覽單個文章 - 艾崴XP333＋GF3/4顯示卡無法開啟AGP材質加速的，解決方案出現了（ALi 解決的）

之前在下的GF4 Ti4200也是遇到此問題

請教了R唐兄之後,於是他傳給在下此PM
再下按照著做,就OK了

PS:雷管30.82需使用RivaTuner v2.0 RC11.1

引用:

先到program file底下的directx>setup>DxDiag>Display確認AGP texture acceleration有沒有開啟, 如果沒有的話

1. Get RivaTuner, and make sure it is Release Canadate 11. Find it in the download section of any 3D website base.

2. Ensure you have the lasted Nvidia 29.xx drivers (I have the latest Nvidia-blessed ones).

3 Update your AGP driver should haven't already done so. If you have an ALi, then get the 1.90 AGP driver.

4. Extract RivaTuner into its own folder, then run it.

5. Go to the PowerUser tab, disregard the warning, then look at the bottom for the folder icons. You want the second one from the left which when selected displays "Open matched Detonator database." Click it.

6. Once it loads, find the fifth line, it should say, "NVIDIA Detonator 29.4x w2k(even if you have XP) System."

7. Once found, scroll down to "Enable Ali AGP." Right click it, click the lighted bulb, and make sure that "1" appeared in the right-hand "Value" column. Exit RivaTuner and reboot.

8.Once rebooted, initate a directx diagnostic and you should find that you can enable the AGP texture acceleration.

ps. 好像只有在ALi晶片上才有這種問題