請問要如何改才正確呢?我只知道.....這三個
Max Memclock(mhz) [Auto]------------------>改為Manual
Current Memclock(Mhz) 166------------------>改為200
DDR Timing Setting by [Auto]------------------>改為Manual
CAS# latency CL=2.5
Row cycletime (tRC) 10 Bus Clocks
Row refresh cyctim (tRFC) 12 Bus Clocks
RAS# to CAS#delay (tRCD) 3 Bus Clocks
Row to Row delay (tRRD) 2 Bus Clocks
Min RAS# active time (tRAS) 7 Bus Clocks
Row precharge time (tRP) 3 Bus Clocks
Write recovery time (tWR) 3 Bus Clocks
Write to read delay (tWTR) 1 Bus Clock
Read to Write delay (tRWT) 4 Bus Clocks
Refresh period (tREF) 2X2592 cycles
Enable 2T Timming [Auto]