我是 Norton Ghost 2003，板子是Asus P4P800 SE，正是intel 865pe 晶片，我是用純DOS開機後，再執行ghost.exe(若你找不到新版的ghost，可用下面的方法)
其Symantec上的解決方法為(其原始網頁已移除，到Google搜尋"Ghost compatibility with Intel 865 chipsets and Serial ATA drives")：
==========================================================
Ghost is compatible with the new Serial ATA (SATA) standard.

If you are experiencing problems like Ghost hanging, locking up, or freezing when loading or while "initializing TCP/IP" once Ghost loads, the problem lies with the interrupt handling for the Intel 865 Chipsets and later. Upgrading to the latest version of Norton Ghost 2003 or Symantec Ghost 8.0 resolves the problem. Also, see the Technical Information section below for information about an update to Symantec Ghost 7.5.

Workaround
Depending upon the mix of SATA and IDE drives installed to your system, one of the following switches should resolve the problem:
If you have an IDE and an SATA drive, or only IDE drives:
-FNI Forces Ghost to use the BIOS to gain access to the IDE drive.
If you have an SATA drive and no IDE drives:
-NOIDE Disables access to IDE devices.
==========================================================