這是我整理過的
1.
Start by making an image of the play cd of the game you want to copy.
The datatype setting to use is securom new (not securom new 4.x) for this purpose and
the image must be saved in CloneCD format and not in alcohol’s native format.
Reading speed doesn’t matter. Max speed will be fine.

2.
Next make a bwa file.
To make a bwa file, you need to use blindwrite's bwa builder.

a)
To make an mds file with alcohol simply make an image of the play cd using securom new 4.x settings in mds/mdf format.
When you're asked to select the measuring speed for the DPM function, again you'll probably get better results at low speed(1x to 8x).
When it's finished making the image files, run the bwa builder and load the mds file by clicking on File and then Load BWA/MDS.
If the graph looks ok then create a .bwa file by clicking on File and then Convert MDS -> BWA.
This will create a .bwa file in the same folder as your .mds file.
You can then delete the mds/mdf files as they're no longer needed.

3.
Now it's time to patch the image files.
Start Twinpeak and in the Options select the twin sector step.
I just use the default of 15 as it works fine for me.
However, 6 and 50 are also known to work.
Select the .ccd file and the .bwa file and then click Start.
Twinpeak will then tell you where it will insert twinsectors and when you click OK it will patch the image files.
When it's finished, you'll have three new files in the same folder where you saved the original image files.
Those files will be patched.ccd, patched.img and patched.sub.

4.
Just start alcohol's image burning wizard and burn patched.ccd using the securom new (not securom new 4.x) datatype setting.
Because this type of copy is anything but standard, out of an abundance of caution,
you'll probably get better results if you burn at relatively low speed (say 8x).
[Note: Before burning you'll be warned that the image size doesn't match the lead-out specified in the toc and you'll be given three burning options.
The first option is correct: "Keep TOC as on source cd, write until end of image file".]

====================
主程式直接燒既可
資料片須上上方式才能燒中 1:1 的片子, 注意!! 此片無法再拿來 copy, 所以需要母片來製作, 建議把 patch 完的印象檔, 再以檔案形式被份起來~