http://club.cdfreaks.com/showthread...5&page=11&pp=25
Quote:
Originally Posted by Halcyon
Erik,
now that Optorite (Sanyo) has dumped the support and sales for UM Doctor Pro II, would it be
possible to get Optorite drives supported in CD speed?
For reference: UM Doctor Pro II
http://www.digital-sanyo.com/BURN-Proof/store/
Optorite DD0401/DD0405 and DD1203/DD1025 chipset (Sanyo LC897490 and Sanyo LC897491
respectively):
http://www.cdrinfo.com/Sections/Rev...?ArticleId=8536
http://www.cdrinfo.com/Sections/Rev...?ArticleId=9905
Looks like the upcoming Optorite (DD1603) might also be based on the Sanyo chipset.
At least UM Doctor Pro can show both C1/C2 and PI/PIF on those Optorite burners.
It would be a very welcome addition, if you feel it's worth the effort and possible to do.
Thanks again for continuing the development of CD Dvd Speed!
I will ask
--------------------------------------------------------------------------------
報價︰
最初透過平靜公佈
艾利克，
既然因為嗯，Optorite(Sanyo)已經傾倒支持和銷售專業人員醫生II， 得Optorite 將是可能的駕駛在CD
速度支持？
供參考︰ 嗯專業人員醫生II
http://www.digital-sanyo.com/BURN-Proof/store/
Optorite DD0401/DD 0405和DD1203/DD 1025晶片組(分別的Sanyo LC897490 和Sanyo LC897491)︰
http://www.cdrinfo.com/Sections/Rev...?ArticleId=8536
http://www.cdrinfo.com/Sections/Rev...?ArticleId=9905
看起來象即將到來的Optorite(DD1603)也可能基于Sanyo晶片組。
至少嗯專業人員醫生能在那些Optorite 燃燒器上顯示C1/C 2和PI/PIF。
如果你感到它值努力並且可能做，它將是非常受歡迎的增加。
為繼續CD Dvd速度的發展再次感謝﹗
我將要求
Re: CDSpeed v3 Disc Quality Test
--------------------------------------------------------------------------------
The new version is being tested and normally it should be released later today.
That's the good news
The bad news is that the enhanced scanning function for BenQ recorders only works with the
8x burners at the moment.
For the 16x burners a new firmware or a new version of Nero CD-DVD Speed (or both) is
needed.
Here is a screenshot of a CD test:
錸︰ CDSpeed v3 光碟質量檢驗
--------------------------------------------------------------------------------
新版本正被測試，通常今天晚些時候應該被發布。
那是好消息
嚴重消息是提升的掃描對BenQ 錄音機起作用只與8x立刻燃燒器合作。
對16x 燃燒器來說一個新固件或者一個尼羅CD -DVD速度(或者兩個)的新版本被需要。
這是一次CD 試驗的screenshot︰
http://cdspeed2000.com/forum/ATAPI_...-2004_23_51.png
http://cdspeed2000.com/forum/LITE-O...-2004_19_02.png
So even though the errors are up to 3000x higher the graphs and scores are similar.
The colored bars on the background are an indication of the acceptable number of errors. For
a good scan the PIFs should stay in the green area.
For LiteOn DVD burners this limit is set to 4 PIFs.
2)
Advanced CD jitter test (only for certain AOpen combo drives and CD-RW recorders)
因此即使錯誤能達到3000x，更高的圖和得分相似。
關於背景的膚色障礙是一個可接受錯誤的數量的跡象。 對一次好掃描來說PIFs 應該呆在綠色的地區。
對LiteOn DVD 燃燒器來說這個限制被調整到4 PIFs。
2)
高級CD 感到緊張試驗(只為一定AOpen取代奶昔兩用機驅動和CD -RW 錄音機)
http://cdspeed2000.com/forum/AOpen_Jitter.png
3)
The Create Data Disc function can now write the test results to the disc.
So then you will always know which drive/firmware/speed was used to burn the disc
The Disc Quality test can use this information:
3)
建立數據光碟函數現下能把測驗結果寫到這個光碟。
如此然後你知道將永遠駕駛哪個/固件/速度用來燃燒那些光碟
光碟質量檢驗能使用這訊息︰
http://cdspeed2000.com/forum/AOPEN_...-2004_10_32.png
http://club.cdfreaks.com/showthread...5&page=12&pp=25
Re: CDSpeed v3 Disc Quality Test
--------------------------------------------------------------------------------
Quote:
Originally Posted by MediumRare
Hi Erik,
Thank you for your continued work on this tool. I'm looking forward to the new version!
I like the idea of marking an "in the green" area for PIF-counts as long as you don't change
the values actually reported. From your samples, this seems to be for PIF only (the colour
is hard to distinguish on my monitor- I'll have to try the new version myself. )
Storing "Create Data Disc" information on the disc itself is also a super idea, like your
sample shows! Thank you!
With the increasing information you're making available, I'd like to repeat halcyon's
request for labels on the axes (I'm a physicist and would like to see units on everything
too). If there is a problem finding room for this information, adding a colour-code to the
axes would do the trick.
What does the RH scale on the lower plots for the LiteOn and Asus drive refer to? (It's
missing on the AOpen plot.)
G
Thanks for the comments
The test only shows the colored bars for PIFs and also the quality score only considers
PIFs. According to my tests it's almost impossible to use the PI errors for calibration
because the differences are too high.
I've increased the brigtness of the colored bars a bit so they should be more visible
The RH scale is used for jitter (in %) but it should not appear if the drive can't report
jitter. I have fixed this.
I will try to add the labels to the axes with the next version.
__________________
錸︰ CDSpeed v3 光碟質量檢驗
--------------------------------------------------------------------------------
報價︰
最初透過MediumRare公佈
喂艾利克，
謝謝你你繼續著手做這工具。 我正期待新版本﹗
只要你不改變實際上報告的價值，我喜歡為PIF 數標明一個"在綠色裡"地區的想法。 根據你的樣品， 這
好像給只，(顏色難在我監視器I'll上區分必須嘗新版本我自己.)的PIF
儲存"建立數據光碟"關於這個光碟本身的訊息也是一種超級想法，象你的樣品顯示的一樣﹗ 謝謝﹗
由於增加的訊息你正弄成可得到， 我想在裁減(我是一名物理學家並且也想在一切上參閱單位)上重複翠
鳥的對標籤的要求。 如果有找到這訊息的空間的一個問題，給斧添加一條彩色代碼將達到目的。
萊茵鋼鐵公司刻度關於低適合LiteOn 和Asus駕駛繪製什麼參考？ (這在AOpen 密謀上丟失.)
G
感謝那些意見
試驗只顯示PIFs的種族隔離，以及品性得分只考慮PIFs。 根據我的試驗用于校準使用PI 錯誤是幾乎不可
能的，因為差別太高。
我已經增加膚色障礙的brigtness 一點，因此他們應該更可見
那些刻度萊茵鋼鐵公司被用于緊張(用百分之)但是出現不能如果那些行程不能，報告感到緊張。 我已經
修理這。
我將努力用下一個版本給斧添加標籤。
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Re: CDSpeed v3 Disc Quality Test
--------------------------------------------------------------------------------
Quote:
Originally Posted by packetloss
Erik, those new features (especially the "comparable graphs and quality scores" feature)
look very exciting, really looking forward to the next version.
The Aopen 1648/AAP might become interesting for quality testing after all. If we can compare
quality scores in a easy and convenient way, CD-DVD Speed might become the standard of
quality testing for us normal consumers, since testing would not be limited to a certain
brand of drives.
The comparable graphs and scores may also convince certain manufacturers to give their
support for the Disc Quality test.
Some of them are worried that people will think the scanning function of their drives is not
accurate because it shows more errors than LiteOn scans.
I hope this version can convince them to support PI/PO testing
錸︰ CDSpeed v3 光碟質量檢驗
--------------------------------------------------------------------------------
報價︰
最初透過packetloss公佈
艾利克，那些新特徵(特別"可比較的圖和高品性得分"特徵)看起來非常令人激動，真的期待下一個版本。
Aopen 1648 /AAP 終究可能對于質量檢驗變得有趣。 如果我們能在一種容易和便利的模式裡比較高品性
得分， 因為測試將不局限于某種運動的品牌，CD -DVD速度為我們正常的消費者可能成為質量檢驗的標準
。
可比較的圖和得分可能也說服某些製造商給他們的對光碟質量檢驗的支持。
他們中的一些擔心人們將認為他們的運動的掃描功能不準確，因為它顯示比LiteOn掃描的更多的錯誤。
我希望這個版本能說服他們支持測試的PI / 郵電亭