以下是Abit USA的回應,有關AIDA32 掃PCI port時會發生的freeze狀況!
以及CPU/RAM比例的加強!
"......(不便透露內容,sorry)....
Just install the PC Mark2002 and run the CPU test alone just fine. Also AIDA has addressed Scanning PCI issue at
http://www.aida32.hu/aida32-faq.php?id=2
We are using the new release Bios ID"12" which is available at
http://fae.abit.com.tw/eng/download/bios/ic7-max3.php
The result is quite impressive with the Bios update.
狂少會做測試再回報大家!
剛看了一下, Bios 12的修正:
BIOS ID: 1.2
Released Date: 8/21/2003
Displayed correct FSB frequency for PSB400 CPU after CMOS data discharged.
Fixed the booting failure problem of Maxtor SATA HDD (Model name: 6Y120M0) in ICH5R RAID 0 status.
Changed the option wordings of "Boot Device" from "ZIP100" to "ZIP100/250" and from "USB-ZIP" to "USB-ZIP/LS120".
Enhanced the system stability when over clocks the CPU FSB over 255 MHz with CPU
RAM = 1:1 setting.
Revised the wording of memory status from "DDR at Bank" to "DDR at DIMM" in system configuration table.
Removed the status report of Serial/Parallel port in system configurations table.
Included new Intel CSA LAN boot agent.
Displayed correct specification of DDR200 memory module during POST.
Fixed the problem that specific CD-ROM device could not be correctly detected when there is specific HDD connected onto the same IDE cable.
Updated CPU micro code (0F24H/1EH, 0F25H/15H, 0F27H/37H, 0F29H/17H).
Revised display wording of "Time Alarm" menu box in BIOS setup.
BIOS Compile Date: 8/21/2003.