讓大家久等了....

From: Andrew Hakman - (Repost by ) Sorry for the bad paste job, this is from cache.


NOTE ABOUT VERSION 2.2 WAP-11's: This hack can NOT be performed on the Version 2.2 WAP-11. It is based on a different chipset, and is in no way compatable with this hack. According to the spec sheet, it's 20dbm, which would work out ot 100mw anyways. BUT, linksys is getting tricky. They're counting the gain from the stock antennas as part of the power output. The real power output can be found in the FCC Registration documentation on the FCC website, which states it is 38mW. There is an interesting hack where you can load the D-Link firmware onto a WAP-11 ver 2.2 (Wap11Ver22Hack) and get it to go 22Mbps (6Mbps real world) right now, and soon 44Mbps (12Mbps real world) when D-Link releases the new ver 2.4 firmware. I've preformed this hack myself and can verify that it works! - Andrew Hakman
對VERSION 2.2 WAP 1.1使用者: 這種破解並不能施用於VERSION 2.2 WAP 1.1, 因為它們使用不同的晶片, 而且無法相容於此破解. 依照SPEC的資料, 此為 20dbm, 正因如此而不能達到100mw. 但是Linksys十分的狡猾, 他們將內存的天線當作power輸出的一部份, 而真正的power輸出是38mw, 這資料可以在FCC網站上依照FCC註冊文件內找到. 有一個十分有趣的方法就是你可以用D-Link的韌體來對 ver2.2作破解, 可以馬上達到22Mbps( 真實世界6Mbps), 而不久後D-Link會釋放新的Ver2.4韌體可達44Mbps(真實世界12Mbps), 我已經施用的這種破解而且確認成功了.

NOTE ABOUT VERSION 2.6 WAP-11's: This hack should work on the Ver 2.6's. I think I found out how to do this now. Check out the instructions at http://melbourne.wireless.org.au/wiki/?SVECWLAP Get the SNMP manager from my website: http://www.andrewhakman.dhs.org/wap11/ver26 - Andrew
對VERSION 2.6 WAP-11使用者, 此破解應可施用於VER 2.6, 我想我找到方法了, 請參看教學頁http://melbourne.wireless.org.au/wiki/?SVECWLAP , 並從這取得SNMP Manager; http://www.andrewhakman.dhs.org/wap11/ver26


Use the USB configuration utility and set your IP Address and Password. The password setting is under the "Security" tab, and then the "Password setting" button.
用USB組態設定工具去設定你的IP位址與密碼, 密碼設定在”Security”欄內, 找到後再按”Password setting”鈕


Download and Install this (http://www.andrewhakman.dhs.org/wap...g/SNMPV1743.exe). Once installed, go to c:\windows or c:\winnt (if you run nt4/2k) and find snmpmanager.ini.
下載與安裝以下檔案 http://www.andrewhakman.dhs.org/wap...g/SNMPV1743.exe , 裝好後去c:\windows或c:\winnt中找一個叫做snmpmanager.ini的檔


Edit so it looks like this: [SNMPmanager] AppMode=21 AppView=21
編輯檔案內部成這樣: [SNMPmanager] AppMode=21 AppView=21
Run the Atmel AP configurator, log into your AP using the password you previously set, and "Administrator" as the authority setting. ]
執行Atmel AP configurator, 用先前設好的密碼登入你的AP, 選Administrator


HAVE FUN - you have ALL the options, even the ones that the linksys software doesn't give you. This also gives any compatable AP (like the SMC MC2655W and the Netgear ME102) all the extra operating modes like briding and AP clinet and whatnot...
好了, 現在你擁有所有的選項了, 有些甚至是Linksys都沒有提供的, 這個破解可以適用於任何相容的AP(SMC MC2655W與NetgearME102)並提供更多的操作模式例如橋接等等


For the output power part, go to the Radio -> configuration option. All the textboxes that come up are the power output for each channel. The highest output power (100mw supposedly) is at hex value 80, and as you change the value (in either direction) from 80, the power output drops linearly (so 7A and 86 are the same power output). These settings might also explain why out of the box, performance isn't the same on all channels (with ver 1.1 hardware, certain channels have lower output power by default, with ver 1 hardware, they're all the same)!
對於power輸出部分, 去Radio選項, 選Configuration, 所有跳出的文字框表示每個頻道Power輸出, 最高的power輸出(應該是100mw)的hex值為80, 你可以從80來更改, power輸出是線性的滑落(7A與86是一樣的power輸出), 這些設定值同時可以解釋為什麼文字框外, 在各個頻道的效能並不相同(Ver1.1的硬體, 這些頻道都因預設而power輸出較低, 在Ver1.1硬體裡, 他們值全都一樣)


Use File -> download changes to send your new settings to the AP
選File->下載設定並傳輸這些新的設定值到你的AP