引用:
Originally posted by xtreme
那是因為你有開cpuidle...
我試過開cpuidle跑prime95超過四小時沒問題...
關掉cpuidle在來跑prime95四小時就掛了...
我用水冷...所以不是因為關掉cpuidle導致溫度升高才掛掉的...
要測穩定還是把cpuidle關掉再來操比較準...
|
有趣!...
開不開CPUidle跑Prime95...
我都試過>6hrs... (on 8RDA+)
溫度在Prime95確實不是問題!
我發生3次Error都是ILLEGAL SUMOUT
比較像是軟體Driver出了Error...
################################################
POSSIBLE HARDWARE FAILURE
-------------------------
If the message "Possible hardware failure, consult the readme file."
appears in the results.txt file, then prime95's error-checking has
detected a problem. After waiting 5 minutes, the program will continue
testing from the last save file.
Could it be a software problem? If the error is ILLEGAL SUMOUT, then
there is a good chance that this is a software problem. A device driver
or VxD may not be saving and restoring FPU state correctly. The good news
is that prime95 recovers very well from ILLEGAL SUMOUT errors. Try seeing
if the problem occurs only when a specific device is active or a specific
program is running.
################################################
也正尋找解答中...CCC