1) copy all the files from your XP cd to a temporary folder
(let's call it C:\XPSource)

2) slipstream SP1 if you haven't already:
http://www.tacktech.com/display.cfm...icle.cfm&id=160

3) copy your now slipstreamed cd files into a folder
(say, C:\XPCD)

4) download the newest SATA RAID drivers from SI. as of this post,
you can get them here: http://12.24.47.40

5) extract the "Si3112r.sys" file into the i386 folder
(C:\XPCD\i386\Si3112r.sys)

6) find the TXTSETUP.SIF file in the i386 folder
(C:\XPCD\i386\TXTSETUP.SIF) and open it in NOTEPAD.

7) add the following line under [SourceDisksFiles]
si3112r.sys = 1,,,,,,_x,4,1

8) add the following line under [HardwareIdsDatabase]
PCI\VEN_1095&DEV_3112&SUBSYS_61121095 = "Si3112r"

9) add the following line under [SCSI.Load]
si3112r = si3112r.sys,4

10) add the following line under [SCSI]
si3112r = "Silicon Image SiI 3112 SATARaid Controller"

11) save your changes to TXTSETUP.INF
this file is for the text-based portion of the install
it keeps us from having to insert a floppy and pressing F6 during setup.

-=-=-=-=-=-
原文出於http://www.nforcershq.com/forum/的asus討論區
但是我現在找不到了......
另外還有提到整合nforce2和其他driver的方法
也就是裝完os後全部搞定，滿方便的