|
Junior Member
|
引用:
Originally posted by windwalker
小弟我之前在DIY Coral時.........
也是被單端接地該接那邊弄的頭暈暈........ =.=
所以直街寫信去問了AQ........
以下是回信......
===============================================
Dear XXX,
The drain wire (the silver wire) should be attached at the #2 (or receiving
end) of the cable only. Do not attach it at the sending end.
I hope this helps.
Regards,
Alasdair Patrick
AudioQuest
8710 Research Drive
Irvine CA 92618
Tel: 949 585 0111
Fax: 949 585 0333
E-Mail:
Website: www.audioquest.com
===================================================
所以說AQ是將單端接地的那一端接在後級/耳擴端.......
訊源端則是不接........
也就是CD-Player (X) -> AMP (O)
===================================================
Dear XXX,
Do you already own the Coral? Or do you intend to order raw Coral? You
should know that factory terminated Coral uses a proprietary Resistance
Welding technique which is vastly superior to soldering. Either way, I
would recommend letting us take care of it for you.
If necessary, you can call us at 949 585 0111 to request a Return
Authorization Number.
Regards,
Alasdair Patrick
==================================================
這一封是我第一封寫去問時.....
AQ的服務人員建議我購買廠製線....說AQ的廠製線用的是特殊焊法............
會讓聲音更好.........不過這點我就不清楚了................
|
每家單端接地的方向似乎不同...如VDH就要求要焊訊源端(sending end)... http://www.vandenhul.com/artpap/groundend.htm
沒錯..Audioquest從Coral開始的頭都是銀質的頭..且不採用銲錫焊接的方式..而是採用高壓接合的方式...這也是為何我會說自行DIY的Viper可能無法發揮線的真正實力...所以soccer兄..請三思.... |