我在微星的外國論壇中晃了一下,發現了一篇文章有提到這項功能
文章中有提到將這個選項enable後cpu溫度會降低,但硬碟的測試分數也
變的較差,而且電壓似乎也會變動...

以下為原文:
KT4V-L voltage changes in 1.8 bios
I found out that enabling CPU Halt is the cause. In other words, enabling CPU Halt decreases the +3.3 line by .10volts and raises the +5 line by .10volts. Also enabling CPU Halt decreases Sandra HD benchmark scores. But, enabling CPU Halt does decrease CPU temps by about 10F. I guess we cant have it both ways. With CPU Halt on, +3.3 is 3.05, +5 is 5.05, +12 is 12.46, -12 is -12.35, -5 is -5.39. CPU Halt is only affecting +3 and +5 volt lines.

若有錯誤請指教..