Afterburner 1.6.0 Beta 4現身!
 

BREAKING NEWS!!!

Afterburner 1.6.0 Beta 4 is released, in this version Unwnider add 2 exciting features. One is highly expected GeForce GTX 480 over-voltage function, the other is special "CaptureVoltageDefault" for AMD 5800 series BIOS issue.

Download:http://pic.xfastest.com/z/MSI/MSI_A...tup160Beta4.rar

[GeForce GTX 480 Over-Voltage]
In Afterburner 1.6.0 Beta 4, you can adjust the voltage of GeForce GTX 480 from 0.825~1.125V. It's not very big adjustment range, but considering egg-cooking capability of GeForce GTX 480, it is safe to stay in this range.

GeForce GTX 470 over-voltage support will be ready in next version.

[Capture Voltage Default]
There are some negative comments on newegg about R5830 Twin Frozr II(http://www.newegg.com/Product/Produc...7491&Tpk=R5830), I will explain what really happen and what "Capture Voltage Default" function is.

In Afterburner, we use a hidden BIOS ID database to identify each card and define voltage adjustment range. The negative comment is right, the PWM on R5830 Twin Frozr II is up6206 which doesn't support I2C voltage adjustment, that's why we add another up6266 I2C chip to support over-voltage. All MSI R5800 series support over-voltage, we can guarantee that!

The trick part is AMD provide us different kind of 5830/5850/5870 GPU -- high voltage and low voltage one. There is NO way to tell which is which by outlook or BIOS ID, they're all the same except different GPU default 3D voltage. Also different GPU use different I2C address to adjust voltage, so it cause us a lot of trouble for the last few weeks, because we can't use database to specify different I2C address on exact same BIOS ID graphics card.

Right now R5830 Twin Frozr II still has this bug, some of R5830 Twin Frozr II can be detected by Afterburner with over-voltage function, but can't adjust it. If you encounter this issue, just follow below step and build your own database specifically for you card and fix the problem once for all!

1. Edit MSIAfterburner.cfg
2. Change AllowCaptureVoltageDefaults from 0 to 1
3. Run Kombustor in windowed mode
4. Press <Ctrl> + <Alt> + <Shift> + <V> to capture voltage
5. Done!

----------------------

最重點是:有GTX 480的大大，可以開啟GF100 GPU核心調電壓大法，嘗試著在散熱器表面煎荷包蛋!

有興趣的玩家也可以用這款來測試POWER夠不夠力XD

看起來新版的afterburner 可以透過跳動的電壓值來抓取調整電壓的點...這會不會太神 :shock:

微星出的這個風扇控制好用,華碩的 SmartDoctor 在 17x版的 N 卡驅動後風扇轉速控制失效,轉速忽快忽慢形成噪音(明明溫度低於60度).

改用這個後完美控制風扇.

噗~ 您真是太幽默了 :like:

ls ls 說錯 N 驅動版本,是 197 之後的風扇聲很怪. SmartDoctor 不能控制, 這個可以.

BREAKING NEWS!!!
野蠻女友現身~~ :like:

1.6.0 Beta 5出來了..支援470電壓調整