BENQ DW1640燒錄DL+R為何出現錯誤？
 

出現的錯誤是I/O ERROR，Test Burn都可以過說
怎麼會這樣？是我的ImgBurn的設定問題還是片子的問題？
已經連掛兩片DL+R了，真痛！
片子是中環 Okay面板。
ImgBurn Settings下I/O裡的設定大家都選哪一個？
ASPI-WNASPI32.DLL
ASAPI-ASAPI.DLL
SPTI-MicroSoft
ElbyCDIO
Patin
Default是選SPTI，跟這個有沒有關系？


I 15:02:26 ImgBurn Version 2.3.2.0 started!
I 15:02:27 Microsoft Windows 2000 Professional (5.0, Build 2195 : Service Pack 4)
I 15:02:27 Total Physical Memory: 1,048,048 KB - Available: 784,988 KB
I 15:02:27 Initialising SPTI...
I 15:02:27 Searching for SCSI / ATAPI devices...
I 15:02:27 Found 1 DVD±RW!
I 15:03:06 Operation Started!
I 15:03:06 Source File: E:\Crysis.game中文\Crysis .mds
I 15:03:06 Source File Sectors: 3,094,323 (MODE1/2048)
I 15:03:06 Source File Size: 6,337,173,504 bytes
I 15:03:06 Source File Volume Identifier: Crysis
I 15:03:07 Source File File System(s): ISO9660, Joliet
I 15:03:07 Destination Device: [0:0:0] BENQ DVD DD DW1640 BSRB (F:) (ATA)
I 15:03:07 Destination Media Type: DVD+R DL (Disc ID: CMC MAG-D01-00) (Speeds: 2.4x)
I 15:03:07 Destination Media Sectors: 4,173,824
I 15:03:07 Write Mode: DVD
I 15:03:07 Write Type: Incremental
I 15:03:07 Write Speed: MAX
I 15:03:07 Link Size: Auto
I 15:03:07 Test Mode: Yes
I 15:03:07 BURN-Proof: Enabled
I 15:03:07 Optimal L0 Data Zone Capacity: 1,547,168
I 15:03:07 Optimal L0 Data Zone Method: ECC Block Boundary
I 15:03:07 Filling Buffer... (40 MB)
I 15:03:08 Writing LeadIn...
I 15:03:10 Writing Image... (LBA: 0 - 3094322)
I 15:03:10 Writing Layer 0... (LBA: 0 - 1547167)
I 15:19:04 Writing Layer 1... (LBA: 1547168 - 3094322)
I 15:34:59 Synchronising Cache...
I 15:35:00 Closing Track...
I 15:35:01 Finalising Disc...
I 15:36:28 Image MD5: 14810d9d9cbd4616c0f2211f671fe259
I 15:36:34 Operation Successfully Completed! - Duration: 00:33:22
I 15:36:34 Average Write Rate: 3,243 KB/s (2.3x) - Maximum Write Rate: 3,360 KB/s (2.4x)
I 16:24:17 Operation Started!
I 16:24:18 Source File: E:\Sis .mds
I 16:24:18 Source File Sectors: 3,094,323 (MODE1/2048)
I 16:24:18 Source File Size: 6,337,173,504 bytes
I 16:24:18 Source File Volume Identifier: Crysis
I 16:24:18 Source File File System(s): ISO9660, Joliet
I 16:24:18 Destination Device: [0:0:0] BENQ DVD DD DW1640 BSRB (F:) (ATA)
I 16:24:18 Destination Media Type: DVD+R DL (Disc ID: CMC MAG-D01-00) (Speeds: 2.4x)
I 16:24:18 Destination Media Sectors: 4,173,824
I 16:24:18 Write Mode: DVD
I 16:24:18 Write Type: Incremental
I 16:24:18 Write Speed: MAX
I 16:24:18 Link Size: Auto
I 16:24:18 Test Mode: No
I 16:24:18 BURN-Proof: Enabled
I 16:24:27 Optimal L0 Data Zone Capacity: 1,547,168
I 16:24:27 Optimal L0 Data Zone Method: ECC Block Boundary
I 16:24:27 Filling Buffer... (40 MB)
I 16:24:27 Writing LeadIn...
I 16:24:35 Writing Image... (LBA: 0 - 3094322)
I 16:24:35 Writing Layer 0... (LBA: 0 - 1547167)
W 16:35:35 Failed to Write Sectors 1032352 - 1032383 - Write Error
W 16:35:35 Retrying (1 of 20)...
W 16:35:35 Retry Failed - Invalid Address For Write
W 16:35:35 Retrying (2 of 20)...
W 16:35:35 Retry Failed - Invalid Address For Write
W 16:35:35 Retrying (3 of 20)...
W 16:35:35 Retry Failed - Invalid Address For Write
W 16:35:35 Retrying (4 of 20)...
W 16:35:35 Retry Failed - Invalid Address For Write
W 16:35:35 Retrying (5 of 20)...
W 16:35:35 Retry Failed - Invalid Address For Write
W 16:35:35 Retrying (6 of 20)...
W 16:35:35 Retry Failed - Invalid Address For Write
W 16:35:35 Retrying (7 of 20)...
W 16:35:35 Retry Failed - Invalid Address For Write
W 16:35:35 Retrying (8 of 20)...
W 16:35:35 Retry Failed - Invalid Address For Write
W 16:35:35 Retrying (9 of 20)...
W 16:35:35 Retry Failed - Invalid Address For Write
W 16:35:35 Retrying (10 of 20)...
W 16:35:35 Retry Failed - Invalid Address For Write

軟體為NERO或酒精
用1640燒了數十片三菱2.4DL都沒問題
你要不要先燒三菱DL試試
如果不成功再來懷疑1640故障

不是！1640我確定是好的，因為燒單面+R沒問題，
我的疑問是不是軟體的設定沒設好？

單面雙層的片子直接用王牌燒錄軟體- Nero 或 Nero Express 燒錄吧,
少掉很多麻煩。

這片可能是inverted stack製程
http://www.ricoh.com/media/dvd/tech.html

如果WS沒有特別調過可能不太能燒
若是1640要燒DL，建議買傳統2P製程的片子
+R小弟知道大概就MKM比較著名吧

可是很可惜的Nero不吃MDF。

謝謝提供網址資訊，不過那個太專業了，看不懂。