nForce Driver 5.10 WHQL Certified上陣!
 

http://www.nvidia.com/object/nforce_udp_winxp_5.10

Installation Notes

Windows XP users must install Service Pack 1, at a minimum, prior to attempting to install this package. Failure to do so will result in the inability to support USB 2.0.
Audio drivers will not install on the following nForce2 products: Chaintech 7NJS. Please use the drivers that come with these products to enable audio functionality.
Installation of DirectX 9.0 or higher is required in order to use NVMixer.

弟剛剛試用了一下,發現記憶體效能斯乎有進步說 有興趣的同好 可以試看看囉!:)

謝謝分享,新的又出來了趕快去更新

Windows XP users must install Service Pack 1, at a minimum, prior to attempting to install this package. Failure to do so will result in the inability to support USB 2.0.

意思是說沒更新SP1安裝這ㄍ軟體是不是不能正常使用USB2.0

真是意想不到，這次的更新是官方網頁呀

比對過了，唯一的差別在GART driver 從3.77升為 4.36
其他趨動程式沒有改變

我的主機板是MSI k7n2 Delta-L,安裝了上一版的驅動程式後,
光碟機及燒錄機使用起來會怪怪的。
(燒錄會頓;使用PowerDVD-5會"電腦沒有回應") :jolin:

換成這個新版本,我的電腦終於正常了! :like:

請問大家安裝nForce2驅動程式時IDE SW有安裝嗎?

我安裝後感覺光碟機怪怪的ㄝ! :jolin: