試試看nForce2驅動(改)
 

在DriverHeaven.net看到國外有人以nVidia官方版的驅動為基礎，再融合之前Aopen釋出的2.62 nForce2，取其較新的部份，做出了Remix:cool: 版本的nForce2 驅動，文末當然免不了又得要宣告一下，風險自負...:D ;)

記得Aopen nForce2 2.62好像出來有一段時間了！？看起來做這驅動好像有點了無新意...不過既然人家有心做這東東，那就給他捧場一下好了∼:)

說明網頁

下載頁面

修改的部份
This Release contains for these drivers for 2k & Xp

Audio driver 3.48 With 3.62 OpenAl files (For Improved
Game Performance)
Audio utilities 3.48 International Version
Network driver 3.39 (WHQL) (Actually newer the leaked 3.46)
GART driver 3.34 (WHQL)
Memory controller driver 3.38 (WHQL)
SMBus driver 3.38 (WHQL)
Installer 3.42
USB driver

XP Only Drivers

SW Ide Driver 3.44
In The Box 3.43
Firewire 1.1 (Install manually if needed)

This Release contains these drivers for 2k & Xp

Audio driver 3.48 (WHQL)
Audio utilities 3.48
Network driver 3.39 (WHQL)
GART driver 3.34 (WHQL)
Memory controller driver 3.38 (WHQL) + TOT.nvu
SMBus driver 3.38 (WHQL) + TOT.nvu
Installer 3.42
Display drivers 44.03
USB driver

XP Only Drivers

SW Ide Driver 3.44
In The Box 2.70
Firewire 1.1 (Install manually if needed)

2k Only Drivers

Mwarhead's Nforce Winxp to Win2 conversion IDE driver 1.4 based off of Nvidia XP driver

DISCLAIMER: As with all modified drivers, please install at your own risk, Driverheaven is not responsible for any possible loss of data, so at least make sure you backup data before installing.

使用回報.....

我用 2.45A 這版....燒錄 DVD 會掛....

我也一樣，DVD燒到12％就葛屁ㄌ，把他移除就OK。

我也裝了......
不過我沒DVD燒錄,不知CD燒錄會不會掛......

我想燒 CD 也是一樣....

不過我用 SCSI CD-R 就沒問題了...(廢話)

我也回報一下∼我是os重灌
直接安裝2.45a non-igp這版...略過ide sw....
硬碟是接在raid卡上
DVD-ROM和燒錄機分別插在主機板上兩IDE插槽∼
cd燒錄沒問題
mb是nf7-s 2.0

ps 我沒dvd燒錄機可以試...:cry:

難怪我一連燒壞兩片PAL3-DISK4......

弟目前使用AOPEN釋放出來的..2.64倒是沒什麼問題
有興趣的可以試試...
下載

ㄟ......那現在最新版是？？

我是用2.78耶.............我覺得不錯說

:D 請問AOPEN的ABIT/NF7-S2.0能用嗎....謝謝您...:D