The last king? Tbred B XPMW LT3C 0322
 

Testing Environment:-
1700+ Tbred B 0322XPMW DLT3C
SLK800 with TT Smart Fan I
EPoX 8RDA+ Rev1.1 with Vdd Mod @ 1.824 V
1x512MB Apacer PC2700 Infineon chips running async, @ 333MHz 6-2-2 2.5CAS (don't ask why, I think most of you guys should know).
MSI Geforce 2 MX 400 64MB SDRAM.
Maxtor 20GB HDD
Antec True Power 430Watt

* I don't have good RAM at the moment..So the benchmark results may not satisfy the readers...

Here is my "test bed"





2GHz at 1.4Vcore. Stable at Prime95


2.2GHz at 1.525Vcore. Stable at Prime95


2.45GHz at 1.775Vcore. Stable at Prime95




Originally tested by Prodigy-a member of forum.lowyat.net


I will be getting mine one later..I will definitely post up my testing result then.
Thx for viewing.

回覆: The last king? Tbred B XPMW LT3C 0322
 

Dude,this one seems not enough to be king yet...

you'd better look for this one! ;)

不錯囉
空冷1.775V上2.4G
不加壓上2.2G
以新基版來說算很好了

He used 1.72v to run 2.4GHz btw..
Bear in mind that the weather over here Malaysia is hotter than Taiwan.
The ambient temperature shown in MBM5 can be as high as 38c when we ran benchmarks with that speed.

Your XPMW 0310 has the same overclockability as ours one.
You forgot to mention that you run at >2.4GHz with lower Vcore due to the efficiency of watercooler.

Yup correct for new OPGA Tbred B, this result is quite impressive.

Also to 狂之風: We have the same XPMW 0310 as the one you have used b4.
But in Malaysia we can only make it stable in Prime 95 at 2.46GHz 1.825v using aircooling like SLK900U, SLK800 or AX7.
No penny to get watercooling yet.

新基版的cpu
有此表現誠屬可貴:)

New test bed again...
 

Specs are:-
1700+ Tbred B 0322XPMW DLT3C
SLK800 with TT Smart Fan II
EPoX 8RDA+ Rev1.1 with Vdd Mod @ 1.824 V
2x256MB Mushkin PC3500 Hi-Performance(running sync at these timings 6-3-3 2.5 CAS)
MSI Geforce 2 MX 400 64MB SDRAM.
Maxtor 20GB HDD
Antec True Power 430Watt.



Here is the results...
2GHz at 1.4Vcore. Stable at Prime95.

note:- SuperPI at 1M reduce to 51s running at Dual Channel.


2.2GHz at 1.5Vcore. Stable at Prime95.


To be continued....
*ps I am running Prime95 at 2.4GHz 1.675v on Epox 8K5A2+...stay tuned.

I find that this batch is quite consistent in terms of overall overclockability.
We bought 3pcs in total. More forum members will get theirs then.
I will help them to post up the results here.

2.45GHz 1.775v.
btw Prodigy's 8RDA+ has problem with >200MHz FSB, so hav to try with lower FSB in order to achieve this speed.

Here you go guys...
2.47GHz at 1.775Vcore... can't do 2.5GHz... can't run stable, is either my mobo or the chip it self... able to boot to 2.5GHz at 1.825Vcore...