請教EPoX 4PCA3+
 

瀏覽這一篇介紹文章的PAGE2有談到主機板上的Broadcom 5702這一顆網路晶片也有支援CSA,不曉得應該如何知道網路晶片是以CSA的模式運作的呢?
文章內容節錄於下:
Broadcom 5702 Controller comes with integrated Gigabit Ethernet MAC and PHY layer functions allowing for a Gigabit Ethernet or 10/100 Ethernet design. It provides a standard IEEE 802.3 Ethernet interface for 1000Base-T, 100Base-TX, and 10Base-T applications (802.3, 802.3u, 802.3ab). The controller is capable of transmitting and receiving data at 1000 Mb/s, 100 Mb/s, or 10 Mb/s data rates. This chip has a special dedicated network bus known as CSA that is linked directly to the MCH so it doesn't share the I/O traffic with other PCI components. CSA has twice the bandwidth (2Gbps) of a PCI 32 bus (1Gbps). This will reduce latency and improve network performance especially for Gigabit Ethernet

剛剛跑去翻雜誌剛好也看到4pca3+
價格不貴 規格也棒
不知道超頻性如何
也不知道他的Gbit網路是不是利用CSA port
要是他可以穩上300 加上CSA port的Gbit網路
我覺得這片板子比市面上許多865pe的板子還要超值
可是不知道要去哪裡買 :(

小弟即將入手
將會測試:like:

已經寫email去請它們把Vcore選項加高到2.0v
真是好板!

C大不是小弟啦
是C哥哥 XD

C大已入手
正在測試中:D :D

csa要怎麼測呢？？:confused: