WinFast TV 2000 XP?
 

請問一下,我今天剛買 WinFast TV 2000 XP,
可是安裝一直有問題,
最後都出現安裝過程有問題 ,安裝失敗.
後來去下載最新的 driver也是一樣....

我是用 win2k,主機板是華碩 A7V133,
有人有遇過一樣的問題嗎....
快救救小弟, 感激不盡.....
:confused:

建議您可以 CALL 電話給 LeadTek 看看, 他們家的服務還不錯, 我自己有些問題也
是直接問他們的.

至於您說下載新的 DRIVER , 我自己試過, 好像是麗台為修正 BUG 而作更新, 但更
新的已不太大, 沒感覺 !

您的問題比較..不易抓到問題核心, 所以無法給您協助, 抱歉了!

以上

首先先謝謝你囉.
問題核心就是 driver 裝不起來..><
最後都會出現"裝置安裝過程發生錯誤,資料不正確"的訊息.:mad:

ㄝ... 建議您要不要試一下, 換一個 PCI PORT 看看,
我猜的, 會不會是 IRQ 作怪, 這一類的卡會要求 "一獨立" 的 PCI PORT !

以上

最近我也想買這一塊WinFast TV 2000 XP~
我ㄉ主機板EPOX 8KHA+.........顯示卡RADEON VE
裝WinFast TV 2000 XP會不會衝到呀~

Help! I bought Winfast TV 2000 XP and I also facing the same problem. I even try the latest driver.

Re: WinFast TV 2000 XP?
 

不好意思打個岔....
我最近也想買這塊所以想請問一下他的擷取功能如何呢?
謝謝!!

I solved my problem already, for those also facing same problem, please read the following article: :)

"The data is invalid" Windows XP

This article only applies to Window XP. Xtra does not accept liability for any problems that might occur from the following article. If you aren't sure how to follow the instructions then please consult technical support.

If you get the error "The data is invalid" while installing a new modem into your system, you can resolve the error by following these steps.

Click "Start" and select "Run".

Type in "regedit" in the open field and click "OK".

The Registry Editor will then appear on the screen

Click on the (+) icon next to the word "HKEY_LOCAL_MACHINE"

Click on the (+) icon next to the word "SYSTEM"

Click on the (+) icon next to the word "CurrentControlSet"

Click on the (+) icon next to the word "Enum"

Click on the (+) icon next to the word "PCI"

Inside the "PCI" folder there are keys like this :

(VEN_1471&DEV_0188&SUBSYS_5004144F&REV_10)

Each of these keys represent a device installed in your PC. You need to go through all of these keys one at a time.


Click on the (+) icon next to the first key and then a subkey will appear below it like this:

3&13c0b0c5&0&10


Click on this key and on the right hand side there will be a value called "DEVICEDESC"

Search through all of the "DEVICEDESC" values for each key. You need to match the "DEVICEDESC" value with the type of device you are installing.

For ADSL Modems this will read "Network Controller". For PCI Modems this will read "PCI Communications Device". For example if the device you are trying to install is an ADSL modem then the "DEVICEDESC" would be "Network Controller". Or, if the device you are trying to install is a PCI modem then the "DEVICEDESC" would be "PCI Communications Device".


Once you have searched through each of the keys and found the correct "DEVICEDESC" right click on it, and select "Permissions".

Place a tick in the box under the word "Allow", next to "Full Control".

Click on "OK"

Close the Registry Editor.

Click on "Start", then select "Control Panel".

Open the "System" control panel.

Select the "Hardware" tab.

Click the "Device Manager" button.

Look for the "Other Devices" heading and click on the (+) symbol next to it.

Right click on the device name that matches the "DEVICEDESC" value you changed in the registry and select "Properties".

Click on the "Driver" tab at the top of the screen

Click the word "Update Driver". Windows will now ask you for the disk or CD-ROM that contains the driver for the failing device.
Once you insert the media and point it to the correct location then the device will now install itself correctly without any errors.

source:

http://www.xtra.co.nz/help/0,,6156-1359658,00.html
http://www.ati.com/support/infobase/4037.html

我也適用EPOX 8KHA+.........
不過顯示卡是LEATEK的GF2 MX
沒啥大問題

我也是耶~~~天丫!! 到底發生啥事丫？？搞不懂~~"

我也換了PCI了~還是一樣~????????

到底是啥問題丫~?