狂少馬上替大家找來IC7MAX3 解決方案囉!
 

以下是Abit USA的回應,有關AIDA32 掃PCI port時會發生的freeze狀況!
以及CPU/RAM比例的加強!

"......(不便透露內容,sorry)....

Just install the PC Mark2002 and run the CPU test alone just fine. Also AIDA has addressed Scanning PCI issue at
http://www.aida32.hu/aida32-faq.php?id=2

We are using the new release Bios ID"12" which is available at

http://fae.abit.com.tw/eng/download/bios/ic7-max3.php

The result is quite impressive with the Bios update.

狂少會做測試再回報大家!:D

剛看了一下, Bios 12的修正:

BIOS ID: 1.2
Released Date: 8/21/2003
Displayed correct FSB frequency for PSB400 CPU after CMOS data discharged.
Fixed the booting failure problem of Maxtor SATA HDD (Model name: 6Y120M0) in ICH5R RAID 0 status.
Changed the option wordings of "Boot Device" from "ZIP100" to "ZIP100/250" and from "USB-ZIP" to "USB-ZIP/LS120".
Enhanced the system stability when over clocks the CPU FSB over 255 MHz with CPU:DRAM = 1:1 setting.
Revised the wording of memory status from "DDR at Bank" to "DDR at DIMM" in system configuration table.
Removed the status report of Serial/Parallel port in system configurations table.
Included new Intel CSA LAN boot agent.
Displayed correct specification of DDR200 memory module during POST.
Fixed the problem that specific CD-ROM device could not be correctly detected when there is specific HDD connected onto the same IDE cable.
Updated CPU micro code (0F24H/1EH, 0F25H/15H, 0F27H/37H, 0F29H/17H).
Revised display wording of "Time Alarm" menu box in BIOS setup.
BIOS Compile Date: 8/21/2003.

狂爺現在任職於北美除蟲部部長:D

我只是除虫隊隊員!:D

之前我也是除蟲小組的隊員 :D

我看虫是爬太慢被你肌肉夾死!:D

近場時機到了~~~~:D :D
沒想到死小孩這麼快就要出走了..........:jolin: :cry: :D

那一層風罩好拆嗎 ? 我想+電容上去 :D

都已經無空焊了.......大大你還不滿足.......:jolin: :p ;) :D

憂大，快敗吧

手停不了我也沒辦法,就是想上 :shy: