偶也哈S-ATAㄌ 不過現市面上都是梭魚5 S-ATA:cry: :cry:
下午把8RDA3+ -12V線路搞定ㄌ 現可穩定工作 MBM5也顯示正確值
等梭魚7200.7 PLUS開賣 再來玩S-ATAㄌ:D :D

好像素真的也@@"

小弟用過8rda+(A3)...8rga+(A3)...8RDA3+(C1 0310A1).....NF7-S(A3)!
感想...
8rda+(A3)...好超．．穩不穩不知..用勤茂ddr400 bh-5(不良)
8rga+(A3)...跟8rda+(A3)差不多....用A-DATA bh-5...但北橋極熱@@"
(可能用內建GF4 MX)
8RDA3+(C1 0310A1)...用A-DATA bh-5....跑ddr400極不穩..一直當~企
有待修正的板子...磐英還不敢發言說是啥問題! 可能會....???

NF7-S(A3)1.2板.....Good! 跑ddr400 cl2 5.2.2.2粉穩!
還是希望買的是2.0板....2.0到底好不好@@"?

小弟的大疑問:
0306 A3板我是跑ddr400穩定?!(沒長時間燒機測試)...但也上過235!
c1板的 0307A1是跑ddr400穩定...切可挑戰ddr460乎?
c1板的 0310A1是跑ddr400穩定?...沒開始戰鬥即戰鼠!

到底那板強@@"?
唯一了解的是....8rda+(c1)...是現在的勝者:think:
其他麗台.微星.承啟的nforce2好像沒人在玩...又想換戰場了:jolin:

哇！還有偉格滴nforce2都沒給泥說到啊?別忘了還有它咧！

加油吧
用力的給他超
超到送修啦:D :D :D :p

會不會到最後變成大家都指定要8rda+ C1 and NF7-S v1.2...
都不買8rda3+ and NF7-S v2.0...
就像大家去買1700+指定要0309一樣...:D

請教一下....

8RDA 如果北橋為C1 (顆粒為Taiwan)

南橋的話素...(小k)

會不好超嗎??

目前找不到 南北橋皆為Taiwan滴 :fear: :fear:

這個網址的評測 NF7-S 2.0可以到228...
http://www.vr-zone.com/reviews/ABIT/NF7Sv2/page2.htm
難道要靠運氣挑板子?

PS.偉格/輝煌的NFORCE2(新北橋) 雜誌評測可到23X...

VRzone那ㄍ測試喔
北橋有改,而且228就得用2.9v的Vdimm:D

有注意它整篇文章最後結論嗎?

"Conclusion

The C1 steppings overclock higher at lower voltages than their predecessors but they hit the same ceiling eventually. The A3 cores take a higher chipset voltage to hit this ceiling. Therefore, for those who are into modding their boards, the Rev. 2.0 boards offer little benefit in overclocking over the Rev. 1.2."

2.0要比1.2好的話,還要有改過喔....8rda+ c1----不必!:D

哇~期望落空:cry:
還是感謝狂少的測試與分享喔!! :cool:
繼續努力吧!!!:like:

剛做了一下8RDA+ 3418 BIOS測試:
FSB230.96, DDR462,北橋不加壓!
記憶體2.74v, 5-2-2-2,無法跑PI,但可跑sandra soft mem-mark



記憶體加壓到2.86v, super pi 1m 41秒達成!



cpu-z記憶體timing 設定