如何加強內部?還有其它地方能改嗎?希望能將改機心得與我分享......

lju 兄 :

小弟目前也還在籌畫階段(現在正在改中置 :))
等真正改機完成之後再來報告 :cool:

我也沒有超低音，不過這一顆是我目前喜歡的，參考看看。




Driver
The 1094A has one 385 mm (15") cone driver, capable of producing very high SPLs. The driver is housed in a 110 liters vented cabinet. The driver is front loaded to improve both the passband efficiency and stopband rejection.

Amplifier
The amplifier produces 400 W of short term RMS power, with very low THD and IM distortion. It is mounted on a large, thick aluminium plate with excellent heat dissipation. Overload protection and power-on muting are included in the amplifier circuitry. The amplifier also incorporates thermal overload and short circuit protection.

●Frequency response: 29-80 Hz (± 2.5 dB)
●120 dB SPL short term @ 1m half space, average over 35-85 Hz
●385 mm (15") drivers
●External dimensions 739 x 468 x 620 mm (29 x 18 3/8 x 24 4/8 inches)
●Amplifier 400 W
●Electronic crossover and protection circuitry
●Built in crossover filter, subsonic filter
●Bass roll-off, phase matching controls

呼呼..ㄚ山又來介紹極品了...大家要小心.^_^

我用Buck T-320.

:) Hata :)

魔王又出現了~~:)

大家快逃:o

小弟是用MK V-125的，以前用雅瑟被動式的時候是自己的耳朵被轟的很難過，現在則是樓上的被我轟的很難過:D ，我自己則是舒服多了;)

呵、沒這麼誇張吧:D

小山兄，你是回應我的嗎，我是說真的喔，以前那顆超低音沉不下去，速度又慢，轟隆隆的很難過，現在沉下去了，可是我家公寓的上下樓隔音結構還不是很好，當然上下樓的鄰居就感受到了，害我現在晚上10點以後只能看文藝片了:D

我是用MK V-1250THX