PCDVD數位科技討論區

PCDVD數位科技討論區 (https://www.pcdvd.com.tw/index.php)
-   DVD 討論區 (https://www.pcdvd.com.tw/forumdisplay.php?f=5)
-   -   小黃買的NEC 3520A試燒 (https://www.pcdvd.com.tw/showthread.php?t=471595)

pollini 2005-04-12 02:37 PM

引用:
作者eves
3520A超讚的...

請更新非官方韌體...
http://www.micheldeboer.nl/firmware/LD3520_1UA.zip


有沒有大大用過 1UA 和 1U9 這兩個韌體

請問有什麼差別呢 哪一個比較穩定呢
都可以設Booktype嗎

linuseng 2005-04-12 03:56 PM

引用:
作者pollini
有沒有大大用過 1UA 和 1U9 這兩個韌體

請問有什麼差別呢 哪一個比較穩定呢
都可以設Booktype嗎


都可以設Booktype,
1U9 韌體我燒了約30片左右,感覺不錯,afa 8x +r 可上12x,而且也沒有同心圓出現。
1ua 韌體我昨天才下載並更新,已燒了兩片,感覺跟 1u9的差不多,

LD3520 1.UA
RIPLOCK REMOVED for fast DVD ripping

LD3520 1.UA QUIET
RIPLOCK enabled for quiet DVD playback on your PC. Please note, this will only playback slow on pressed DVD’s. DVD-R and +R media will still play at full drive speed. This is a feature of the STOCK NEC firmware.

Both firmwares share the same strategy edits and speedups.

Changes :
Now packaged with Binflash 1.15
RITEK F1 – F5 speeded to 16X
PRINCO 2X speeded to 4X
PRINCO 4X speeded to 8X
RITEK R03 Rev 3 speeded to 12X all other revisions remain at 8X
Full media table included in the documentation

Disc Quality scans can be submitted with (Liteon drives) using K-Probe @4X scan speed or CD-DVD Speed (disc quality) @4X scan speed.

jonhan 2005-04-12 05:39 PM

請問有無Booktype會差很多
正在考慮是否更新韌體

21514 2005-04-12 05:57 PM

Booktype~是讓+R的空片偽裝成-R~
能讓較早以前只能讀-R的DVD~能夠讀取~!!

chiche 2005-04-12 06:41 PM

引用:
作者linuseng
都可以設Booktype,
1U9 韌體我燒了約30片左右,感覺不錯,afa 8x +r 可上12x,而且也沒有同心圓出現。
1ua 韌體我昨天才下載並更新,已燒了兩片,感覺跟 1u9的差不多,

LD3520 1.UA
RIPLOCK REMOVED for fast DVD ripping

LD3520 1.UA QUIET
RIPLOCK enabled for quiet DVD playback on your PC. Please note, this will only playback slow on pressed DVD’s. DVD-R and +R media will still play at full drive speed. This is a feature of the STOCK NEC firmware.

Both firmwares share the same strategy edits and speedups.

Changes :
Now packaged with Binflash 1.15
RITEK F1 – F5 speeded to 16X
PRINCO 2X speeded to 4X
PRINCO 4X speeded to 8X
RITEK R03 Rev 3 speeded to 12X all other revisions remain at 8X
Full media table included in the documentation...


請問你Afa 8X上12X是用哪一種燒錄軟體?

Orpheus 2005-04-12 07:18 PM

不知道有問題的機子是不是產地有關
可以請有問題的網兄post產地嗎

eves 2005-04-12 07:33 PM

我用nero 最新版...
直接拖硬碟的東西燒...(清倉)

變色龍上4x上12x(這算普通吧..)
上不去16的原因是硬碟跟不上XD....(WD 80G 8MB...15X是他的極限)

jonhan 2005-04-12 10:35 PM

那是否要買顆萬轉的硬碟來用

bbball 2005-04-13 12:21 AM

引用:
作者ericlei
謝謝您的回答,但Z-CLV燒錄的甜甜圈是很均勻的,而我燒出來的狀況是刻痕有深有淺,
且有粗有細,線條約有7.8條,我想應該不是Z-CLV燒錄所造成,若有誤請指教,THANKS!

另外,將這些DVD+R片子放入DVD PLAYER或PC看影片,則會有完全停頓之現象,而DVD-R燒出來的刻痕就很均勻,看片也OK.



這就是為什麼third party的firmware吸引人的原因啦!一般而言早期的DVD player對-R的支援度會比較高,對+R的支援度比較低甚或全無。透過1U9或1UA的firmware可將DVD+R偽裝成DVD-ROM,解決大部分的相容性問題。

如果沒有日後維修的顧慮,建議刷1UA韌體,體驗使用3520A的真正快感。

eves 2005-04-13 12:49 AM

那是否要買顆萬轉的硬碟來用<<


我想排線才是問題所在....
準備給他sata介面卡....


所有的時間均為GMT +8。 現在的時間是07:48 PM.

vBulletin Version 3.0.1
powered_by_vbulletin 2025。